CF wrap interior trim
#37
Cuts really easy with a blade. Heat it up some and see how easy it is to work with. THe trick is to not overstretch it and ruin the weave pattern.
#40
Always use a hair dryer . It burns very easily and you dont need a heatgun to get it to stretch . When using the cF Viynl upholstry we use a heat gun but the dinoc is much more sensitive to heat and streches with lower temps . Get the 3m primer for it as well . works wonders on getting it to hold around corners . We usually will glue down the flaps on the backside of the panels too for added durability around sharp curves. .
The following users liked this post:
GXXXV X (09-06-2011)
#42
^ We have a guy (JRollo) in the Canadian section that was selling all types of it a while back. He may still be.
https://g35driver.com/forums/canada/...-cf-vinyl.html
https://g35driver.com/forums/canada/...-cf-vinyl.html