I am sold on getting some CV3 Vossen wheels. They are 20x8.5 or 20x9 will they tuck under the car with out lowering it?

I would rethink getting 20s without lowering the vehicle. It'll look bad.

Yeah the space in the wheel well will still be there?

Yep, if you go 20s your car will look much better with even a mild drop.

Will the space go away without lowering??

No lol

Lol ok

A mild drop that won't require camber arms/toe bolt kits will only set you back about $250-300, even cheaper if you buy someones' used springs (only if they're low miles on them). It's a bit of a lengthy DIY but one almost anyone can do, it'll save you about $500 in labor. You'll also have to pony up around $100 for an alignment~So about $350-400 if you do the install. Eibach, Tanabe, and Swift make springs w/ milder drops that should allow you to keep your alignment in spec. If you're going to invest the coin in Vossens might as well cough up a bit more and drop it so it'll look better.

20s on a stock height RWD look funny let alone an AWD... if your dead set on staying stock height, get 19s.

subd

Well I am just gonna get some swift awd springs and see how it looks first.

A drop with bigger wheels, is worth it...even a mild one...

Yeah gonna order some swift springs tonight. Do you know the part number for the AWD models

Well when you get them i hope to see some pix. I small drop to close up the wheel gap would be best

You will I won't be able to stop taking them
Lol.