Does anyone know if 2006 brembos off a 350z will for fit a 2008 g35x sedan?

 

You would need new brackets.

 

What kind of brackets? Would you happen to have a part #?

 

The brackets, if they are made, are custom and not oem

 

Where can I get custom brackets and would u know how much it would cost?

 

I don't know about X, but RWD needs spacers to clear BBK in the front?

 

I should just sell my brembos. This is too much headache.

 

Just take it to a performance shop and ask for a quote to install them for you, most should be able to fabricate one for you. If you feel like it is too much money or hassle then sell them.

 

this^^ or a good machine shop should be able to get it fab'd.

 

Not worth it, just get akebonos

 

Don't akebonos need brackets to be installed for 2nd gen sedan as well?

 

I should just sell my brembos. This is too much headache.

 

The Akebono's don't need brackets to install on the 2nd gen. It was made for the V36!

Between getting custom brackets made for your Brembo's and the downtime associated with it, you are better off selling the Brembo's and getting the full Ake kit.

Granted, the Brembo's are likely better at track duty than the Akebono's, but with the proper pads the Ake's will work just fine. I tracked mine without issues (paired with 2pc front rotors.)

 

what soundmike said. could you make the brembos work? sure anything is possible. but selling them for a akebonos is going to be a quick and easy install for close to the same performance.