Has anyone tried to use the hella micro de???
I was just planning to put the L shape DRL led any advice?
I was just planning to put the L shape DRL led any advice?
Registered User
I'd just say don't do the L shape LEDs like the Mercedes. I did a triangle pattern like the G37 led kit and it compliments the shape of the sport bumper really nicely.
Quote:
That looks pretty good 0-0 I may consider that I was going to get the l shape but it looked cheap I did look at those but idk what form I should put them how did you wire them ? Did you use a risistor ? I was thinking about wiring them to my drl that's where I have my halo rings wired toOriginally Posted by equifire
I'd just say don't do the L shape LEDs like the Mercedes. I did a triangle pattern like the G37 led kit and it compliments the shape of the sport bumper really nicely.
Quote:
Also what are the specs on the eagle eye ? 3w 9w 10w?Originally Posted by equifire
I'd just say don't do the L shape LEDs like the Mercedes. I did a triangle pattern like the G37 led kit and it compliments the shape of the sport bumper really nicely.
Registered User
Quote:
what did you do to your headlights? Did you just paint the inside of them black? They look amazingOriginally Posted by Victorg35s
Has anyone tried to use the hella micro de??? I was just planning to put the L shape DRL led any advice?
Quote:
I did COB halo rings with 5 min epoxy ...... Dupli color hi temp paint from any auto zone pep boys etc...... Originally Posted by ascott905
what did you do to your headlights? Did you just paint the inside of them black? They look amazing
1. Heated the headlight at 250 degrees 8-10 min make sure you remove the light harnesses and any plastic that is on it .
2. I opened them from the flat part of the head light and started to open it there is a DIY on it somewhere on this forum
2. Self etching primer....... Make sure you cover your lens apply 2-3 coats
3. Paint them with the hi temp duplicolor spray paint I'll post pics I didn't take many I should have .......
4. to seal it I use 3m window weld from pep boys or I Reilly's pep boys was 18$
And should be done
Quote:
It blinds me at night....... Can't take a good pic I'll try to use my Nikon I'll post picsOriginally Posted by e_nigma
That's a cool look. I'm sure it looks hot at night
Registered User
Quote:
thanks man hopefully I'll have some time to do it then I'll post some picturesOriginally Posted by Victorg35s
I did COB halo rings with 5 min epoxy ...... Dupli color hi temp paint from any auto zone pep boys etc...... 1. Heated the headlight at 250 degrees 8-10 min make sure you remove the light harnesses and any plastic that is on it . 2. I opened them from the flat part of the head light and started to open it there is a DIY on it somewhere on this forum 2. Self etching primer....... Make sure you cover your lens apply 2-3 coats 3. Paint them with the hi temp duplicolor spray paint I'll post pics I didn't take many I should have ....... 4. to seal it I use 3m window weld from pep boys or I Reilly's pep boys was 18$ And should be done
Registered User
Quote:
No resistor just 3w LEDs and a relay. I posted the links in this thread. Originally Posted by Victorg35s
That looks pretty good 0-0 I may consider that I was going to get the l shape but it looked cheap I did look at those but idk what form I should put them how did you wire them ? Did you use a risistor ? I was thinking about wiring them to my drl that's where I have my halo rings wired to
https://g35driver.com/forums/g35-sed...-think-11.html
[QUOTE="equifire;6918250"] No resistor just 3w LEDs and a relay. I posted the links in this thread. https://g35driver.com/forums/g35-sed...-think-11.html[/QUOTE
The relay is like the ones you would connect to fogs right?
The relay is like the ones you would connect to fogs right?
Registered User
My headlights move as the steering wheel turns left or right. Do yours also and if so does that affect the halos attached to the projectors or are they fine?