OEM Backup camera install
#1
#3
I installed an OEM camera in my non nav G35X
It came with 4 wires.
If you look inside your trunk lid, you will see a female plug. Follow those wires to a connector above the driver's side wheel well in the rear fender.
2 wires for video are shielded.
You can splice those, run them through the back seat, under the carpet , up through the armrest .
I took out the IPOD plug because ipods are lame.
For the 2 power wires I spliced into my reverse bulb in my trunk lid.
It extends the life of the camera, only turning on when the car is in reverse.
Since I only use AUX to run my in car entertainment via bluetooth adapter (MP3, Spotify, Youtube ect) it's always in AUX anyways so the camera is always ready to go.
If you're listening to the radio, or the CD changer you have to press AUX to see the camera.
It came with 4 wires.
If you look inside your trunk lid, you will see a female plug. Follow those wires to a connector above the driver's side wheel well in the rear fender.
2 wires for video are shielded.
You can splice those, run them through the back seat, under the carpet , up through the armrest .
I took out the IPOD plug because ipods are lame.
For the 2 power wires I spliced into my reverse bulb in my trunk lid.
It extends the life of the camera, only turning on when the car is in reverse.
Since I only use AUX to run my in car entertainment via bluetooth adapter (MP3, Spotify, Youtube ect) it's always in AUX anyways so the camera is always ready to go.
If you're listening to the radio, or the CD changer you have to press AUX to see the camera.
#5
#6
I saw your post in the other thread, so please excuse the redundancy. Can you explain the process when one swaps out the non camera chrome lip with an OEM one with the camera? With the other aftermarket cameras you have to splice in for power and run the video line to the A/V inputs in the center console. Do we have to do the same with the OEM camera, or are the wires already in the lid and we just have to plug into them?
#7
Did you get a camera installed? Did you end up going OEM or use an aftermarket solution?
Trending Topics
#8
I saw your post in the other thread, so please excuse the redundancy. Can you explain the process when one swaps out the non camera chrome lip with an OEM one with the camera? With the other aftermarket cameras you have to splice in for power and run the video line to the A/V inputs in the center console. Do we have to do the same with the OEM camera, or are the wires already in the lid and we just have to plug into them?
Splice for power ( I used the reverse tail light line so power is applied when the reverse lights turn on) .
Run RCA's to your armrest
Really simple bro
#9
thanks
#10
Watch both those videos. I don't think anyone here is going to make a video just for you bro .
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 Audio, Video & Electronics
39
01-31-2011 08:16 PM