Help on changing the temperature display unit.
#1
Join Date: Mar 2007
Location: So. Cal.
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
#3
I don't remember anyone actually making this change.
The only thing that I have seen that looks promising it is in the wiring diagram (in the service manual) for the Automatic Air Conditioner system. It shows pin 14 of connector M31 only exists for Canadian models. It shows that pin connected to Ground for Canadian models. Then above pin 14, it says "C/F". This is all on page atc-47 of the factory service manual for my 2004.5 coupe.
This may mean that if you connect pin 14 of connector M31 to ground that it would display in C. But then again there could be more to it...
The only thing that I have seen that looks promising it is in the wiring diagram (in the service manual) for the Automatic Air Conditioner system. It shows pin 14 of connector M31 only exists for Canadian models. It shows that pin connected to Ground for Canadian models. Then above pin 14, it says "C/F". This is all on page atc-47 of the factory service manual for my 2004.5 coupe.
This may mean that if you connect pin 14 of connector M31 to ground that it would display in C. But then again there could be more to it...
#5
Join Date: Mar 2007
Location: So. Cal.
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dave
I don't remember anyone actually making this change.
The only thing that I have seen that looks promising it is in the wiring diagram (in the service manual) for the Automatic Air Conditioner system. It shows pin 14 of connector M31 only exists for Canadian models. It shows that pin connected to Ground for Canadian models. Then above pin 14, it says "C/F". This is all on page atc-47 of the factory service manual for my 2004.5 coupe.
This may mean that if you connect pin 14 of connector M31 to ground that it would display in C. But then again there could be more to it...
The only thing that I have seen that looks promising it is in the wiring diagram (in the service manual) for the Automatic Air Conditioner system. It shows pin 14 of connector M31 only exists for Canadian models. It shows that pin connected to Ground for Canadian models. Then above pin 14, it says "C/F". This is all on page atc-47 of the factory service manual for my 2004.5 coupe.
This may mean that if you connect pin 14 of connector M31 to ground that it would display in C. But then again there could be more to it...
thanks for the help, i just hope it could be as easy as the nissan quest..(one button changes it)
Originally Posted by izmir41500
why would you want to, unless you're used to seeing C? it may be a pain in the @ss but good luck to you. i'd get more info from dave ^
Thread
Thread Starter
Forum
Replies
Last Post
Frostbite91
Audio, Video & Electronics
5
08-20-2015 07:20 PM