My 04 G35 has a grinding at speeds under 10 MPH. Is there a cure or fix for this

 

Does it only happen right after you've started the engine and begin to accelerate? If so, that's normal -- it's the ABS self test.

 

No... its overtime I slow down to stop....and takeoff again....its everytime

 

The brakes pads and rotors have been changed. The right wheel bearing hub was changed. It's always grinding when taking off and braking under 10 mph....it does it at every stoplight.. any ideas

 

were the pads and rotors bedded correctly when you replaced them? if not you may need to re-surface both pads and rotors and follow the bedding process.

 

Does bedding really make a difference. The brake companies say no it doesn't... even brembo says no

 

it depends on the parts you bought. if they have already been bedded by the manufacturer, then you wouldnt have to.

 

I have the same problem with my 04 coupe too G35phile. My car makes that grinding noise only on the front passenger side and it pulls slightly to the right. Does your do the same thing???

 

Mine doesn't pull.....but the rest yes

 

Did you fix your problem G35phile? Was it the wheel bearing?

 

Nope..... It still has the noise.......the bearings were changed. The brakes have been replaced......any other ideas

 

Did you check the compression rod bushings? Try to lupe swaybar bushings? See if that helps

 

Why would it do that at low speeds

 

I believe the compression rod bushing will cause squeak and other noises if they're worn out. I checked my car and the right front bushing was ripped, i bought a new set of Energy bushing to replace it. Will post the update when i'm done.

 

Your car might have something else not the CR bushing, just give it a quick look since you've already replaced the wheel bearing and breaks.