I purchased a ionicdynamics cb diffuser locally for a g35 coupe. The owner didnt have the hardware but did have the instructions to install it. I was wondering if you guys know what bolts, or screws I should use. As well as the 3M double sided tape. Thanks

 

It uses 2 screws at the license plate area & about 4-6 push in clips on the under side, same as the clips used to hold in the fender liners & grill. The predrilled holes on mine were off as it didn't fit flush. Had to drill new holes.

 

Oem push clips should be on eBay right

 

Yeah, but I think they where twice the length & more durable/thicker. You should just PM ionic on here, Im sure they will sell you some for cheap.

 

Ok that's what I'll do

 

So emailed ionic and pmed. They still haven't responded. Anyone else know what exact hardware I need. Are the oem push clips the same as the clips all over the bumper and battery cover?

 

You could use a variety of things. Personally, I'll be using bolts when I install mine.

 

I went to Autozone and bought an assortment kit of license plate mounting hardware. There were plastic "nut" inserts and stainless hardware. Worked pretty slick.

 

IONIC diffusers come with tape installed, plastic push pins work fine since it's screwed in behind the license plate...Gary

 

Aha, I should have mentioned my diffuser is from Mr. Wong at Statik, I was unaware IONIC's came with tape installed.