General Tech Questions This Forum is Only for Questions and Posts that Do Not fit under the other Tech categories.(No Classified Posts)

Engine bay rattle under load

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jun 11, 2022 | 12:53 AM
  #1  
2004-350Z-sand's Avatar
Thread Starter
|
Registered User
Joined: Jun 2022
Posts: 10
Likes: 0
nisaan 350Z 6MT enthusiast
Engine bay rattle under load

Hey all it’s me back again with my stupid rattle issue on my 2004 350Z 6MT. I’ve done some more digging and this is what I’ve found.



It’s and intermittent rattle from what I believe is the engine bay when under load from 2500-3000 rpm.



We’ve determined it only occurs when the car is up to temperature and NOT when cold.



We cannot reproduce the sound in neutral by revving the motor.



There is no rattle upon cold start from the engine like videos have shown online about the primary tensioner being bad



My mechanic was super busy when he had my car so didn’t have too much time to look into the car however he pulled my spark plugs and said they looked good as well as having hooked his scanner up to the car and said when the noise occurs the car is not pulling/retarding timing at all. Car does have the correct oil pressure according to my gauge when under load and the oil has never ever dropped as I constantly check it daily (yes I know I’m a bit overkill when it comes to this).



Car is bone stock motor wise apart from a k&n cold air intake and throttle body spacer which came on the car.



This is a similar video which I have found on YouTube of a g35 having the same issue with no resolution.



Any help would be greatly appreciated thanks all!
https://youtu.be/enBgYrVyE2Y

 
Reply
Old Jun 11, 2022 | 12:52 PM
  #2  
Scorpi0's Avatar
Registered User
Joined: Feb 2018
Posts: 3,087
Likes: 445
From: LA, Cali
My car will make the same sound but not as loud. And it will only do it on a totally cold engine, in drive, and flooring it right after start up.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2004-350Z-sand
Engine, Drivetrain & Forced-Induction
5
Jun 16, 2022 10:52 PM
speedjunkie_G35
General Tech Questions
4
Feb 8, 2011 10:55 AM
DT35G
G35 Coupe V35 2003 - 07
11
Nov 3, 2010 10:38 AM
jjsomer
Engine, Drivetrain & Forced-Induction
6
May 3, 2010 03:15 PM
Andyl
Engine, Drivetrain & Forced-Induction
14
Nov 10, 2009 03:58 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:39 PM.