Group Buy *** 07+ G35 / G37 Sedan Carbon Fiber Rear Diffuser ***
Mureshan, since you're the one who insisted on buying the prototype, then you're definitely at fault here. I remember when RAVSPEC had issues with the Asian spec bumper fitment and when you kept telling them you wanted it for cheap. You can't blame RAVSPEC for the fitment issues especially since they warned you it may not fit. I think RAVSPEC is being very nice here at offering you a refund for the diffuser.
RAVSPEC, are you still going to make these diffusers?
RAVSPEC, are you still going to make these diffusers?
You're Despicable
Joined: May 2008
Posts: 6,167
Likes: 33
From: on a sand dune
Ohhh ok I got a bit confused over there,
I didn't realize his was a First prototype diffuser, my bad.
But RavSpec can you give us an ETA on the diffuser? any updates since last time? because I'd rather wait for your product than go with the Auto-X one <-----Don't like the design
I didn't realize his was a First prototype diffuser, my bad.
But RavSpec can you give us an ETA on the diffuser? any updates since last time? because I'd rather wait for your product than go with the Auto-X one <-----Don't like the design
Registered User
Joined: Oct 2009
Posts: 188
Likes: 0
Dear RavSpec, at fisrt I wanna tell you that I'm not from Ukraine, I'm from Russia. These are different countries.
Than if you made a prototype and not sure about its fitment, why are you selling it?????? Why is it on you web page??? First test the fitment and then sell it, I think thats the way of doing business. If you don't know exactely if it will fit or not, don't put it on sale on your web page.
Yes, I have a euro bumper, I sent you the measures of it, and you said that it is ok. and will fit!! I new that your diffuser was made for euro bumper (not for US). I didn't now that there are different types of euro bumpers either.
And about confusing the board....I PM'ed you 3 times 4 days ago, and had no answer!!!!! What should have I done? I wrote here because you didn't answer me!
Than if you made a prototype and not sure about its fitment, why are you selling it?????? Why is it on you web page??? First test the fitment and then sell it, I think thats the way of doing business. If you don't know exactely if it will fit or not, don't put it on sale on your web page.
Yes, I have a euro bumper, I sent you the measures of it, and you said that it is ok. and will fit!! I new that your diffuser was made for euro bumper (not for US). I didn't now that there are different types of euro bumpers either.
And about confusing the board....I PM'ed you 3 times 4 days ago, and had no answer!!!!! What should have I done? I wrote here because you didn't answer me!
Mureshan:
You emailed me on Jan 31 and Feb 1 st and that's only twice. You post it here on Feb 3rd. Jan 31st is a Sunday, so you only gave me 1 day to reply to you.... Sorry if I don't get to my email within timely matters. I checked my PM, you didn't send me any PM.
First of all, I do apologize for getting the country wrong, Russia is much different from Ukraine. In Russia, Ukraine, I think you guys get cars from different part of the world some from the Europe, some from Asia and I think some comes from USA too.
You don't have a US Spec bumper and you dont' have a EuroSpec / Asia Spec Bumper. Your license plate indent however do measure up to our diffuser but the concave seem to be different. I have no way to tell the concave are different from the measurement you sent me.
I didn't advertise to sell this prototype diffuser, I have told everyone this is the wrong diffuser for the US Spec bumper. Yes, we do test fitment before selling it, that's why we have to make a 2nd revision, if you haven't follow the board.
You contacted me to buy them after I told you I am not sure if it will fit and I gave you the measurement to check. I did save all the emails including those that included you low balling for the diffuser. You also say that since it's a prototype and you are willing to test fit for me and ask me to sell it to you for cheaper.
In fact, I even sent you a free roof spoiler as a courtesy, Now I regret it.
I haven't see any of the pics yet, it will help if you can send me some pictures to verify this. So, why don't you start by selling me install pics and the problems that you have about the diffuser so we can take a look at this.
To the rest of the board, we are having some issues with the factory that's making these for us. It's a long story, but the answer to most of you is that I can't get a promise delivery date on this project.
So ... I have to start making refund to all those that have deposit in this group buy.
You emailed me on Jan 31 and Feb 1 st and that's only twice. You post it here on Feb 3rd. Jan 31st is a Sunday, so you only gave me 1 day to reply to you.... Sorry if I don't get to my email within timely matters. I checked my PM, you didn't send me any PM.
First of all, I do apologize for getting the country wrong, Russia is much different from Ukraine. In Russia, Ukraine, I think you guys get cars from different part of the world some from the Europe, some from Asia and I think some comes from USA too.
You don't have a US Spec bumper and you dont' have a EuroSpec / Asia Spec Bumper. Your license plate indent however do measure up to our diffuser but the concave seem to be different. I have no way to tell the concave are different from the measurement you sent me.
I didn't advertise to sell this prototype diffuser, I have told everyone this is the wrong diffuser for the US Spec bumper. Yes, we do test fitment before selling it, that's why we have to make a 2nd revision, if you haven't follow the board.
You contacted me to buy them after I told you I am not sure if it will fit and I gave you the measurement to check. I did save all the emails including those that included you low balling for the diffuser. You also say that since it's a prototype and you are willing to test fit for me and ask me to sell it to you for cheaper.
In fact, I even sent you a free roof spoiler as a courtesy, Now I regret it.
I haven't see any of the pics yet, it will help if you can send me some pictures to verify this. So, why don't you start by selling me install pics and the problems that you have about the diffuser so we can take a look at this.
To the rest of the board, we are having some issues with the factory that's making these for us. It's a long story, but the answer to most of you is that I can't get a promise delivery date on this project.
So ... I have to start making refund to all those that have deposit in this group buy.
, I hope you guys can get it done because I would much rather have your diffuser than the Auto-X one....fingers crossed
Registered User
Joined: Oct 2009
Posts: 188
Likes: 0
Mureshan:
You emailed me on Jan 31 and Feb 1 st and that's only twice. You post it here on Feb 3rd. Jan 31st is a Sunday, so you only gave me 1 day to reply to you.... Sorry if I don't get to my email within timely matters. I checked my PM, you didn't send me any PM.
First of all, I do apologize for getting the country wrong, Russia is much different from Ukraine. In Russia, Ukraine, I think you guys get cars from different part of the world some from the Europe, some from Asia and I think some comes from USA too.
You don't have a US Spec bumper and you dont' have a EuroSpec / Asia Spec Bumper. Your license plate indent however do measure up to our diffuser but the concave seem to be different. I have no way to tell the concave are different from the measurement you sent me.
I didn't advertise to sell this prototype diffuser, I have told everyone this is the wrong diffuser for the US Spec bumper. Yes, we do test fitment before selling it, that's why we have to make a 2nd revision, if you haven't follow the board.
You contacted me to buy them after I told you I am not sure if it will fit and I gave you the measurement to check. I did save all the emails including those that included you low balling for the diffuser. You also say that since it's a prototype and you are willing to test fit for me and ask me to sell it to you for cheaper.
In fact, I even sent you a free roof spoiler as a courtesy, Now I regret it.
I haven't see any of the pics yet, it will help if you can send me some pictures to verify this. So, why don't you start by selling me install pics and the problems that you have about the diffuser so we can take a look at this.
To the rest of the board, we are having some issues with the factory that's making these for us. It's a long story, but the answer to most of you is that I can't get a promise delivery date on this project.
So ... I have to start making refund to all those that have deposit in this group buy.
You emailed me on Jan 31 and Feb 1 st and that's only twice. You post it here on Feb 3rd. Jan 31st is a Sunday, so you only gave me 1 day to reply to you.... Sorry if I don't get to my email within timely matters. I checked my PM, you didn't send me any PM.
First of all, I do apologize for getting the country wrong, Russia is much different from Ukraine. In Russia, Ukraine, I think you guys get cars from different part of the world some from the Europe, some from Asia and I think some comes from USA too.
You don't have a US Spec bumper and you dont' have a EuroSpec / Asia Spec Bumper. Your license plate indent however do measure up to our diffuser but the concave seem to be different. I have no way to tell the concave are different from the measurement you sent me.
I didn't advertise to sell this prototype diffuser, I have told everyone this is the wrong diffuser for the US Spec bumper. Yes, we do test fitment before selling it, that's why we have to make a 2nd revision, if you haven't follow the board.
You contacted me to buy them after I told you I am not sure if it will fit and I gave you the measurement to check. I did save all the emails including those that included you low balling for the diffuser. You also say that since it's a prototype and you are willing to test fit for me and ask me to sell it to you for cheaper.
In fact, I even sent you a free roof spoiler as a courtesy, Now I regret it.
I haven't see any of the pics yet, it will help if you can send me some pictures to verify this. So, why don't you start by selling me install pics and the problems that you have about the diffuser so we can take a look at this.
To the rest of the board, we are having some issues with the factory that's making these for us. It's a long story, but the answer to most of you is that I can't get a promise delivery date on this project.
So ... I have to start making refund to all those that have deposit in this group buy.
Maybe this is my fault, maybe not....it doesn't matter now. Sorry if smth in my messages was wrong....
I'll send you pics of the diffuser asap. I don't need any refund, it gonna be very small because of delivery cost of the diffuser back to you. Don't mind it.
BTW The roof spoiler that you sent me for free is still in my bodyshop, never installed, so don't regret it).
Sorry....
getting the final revision prototype on June 10th.
BTW, I have make several refund to people that wants to back out, but if I miss anyone, please email me at mark@ravspeconline.com !
Thanks.
BTW, I have make several refund to people that wants to back out, but if I miss anyone, please email me at mark@ravspeconline.com !
Thanks.
You're Despicable
Joined: May 2008
Posts: 6,167
Likes: 33
From: on a sand dune
getting the final revision prototype on June 10th.
BTW, I have make several refund to people that wants to back out, but if I miss anyone, please email me at mark@ravspeconline.com !
Thanks.
BTW, I have make several refund to people that wants to back out, but if I miss anyone, please email me at mark@ravspeconline.com !
Thanks.
I've already e-mailed you guys like 3 times before asking for my money back, but until now I have not received anything. Could someone please get around to paying me back as it has been over 3 months since I've asked for the refund. my paypal e-mail is x mazinx @ gmail.com
any updates would be appreciated