just wondering because id like to know what i need to do to make my car legal and get recon.

 

according to your sig, the only thing is the drop, alignment numbers have to be in stock specs. and the alignment paper has to be no older than 30 days.

 

well right now I have kenstyle rear and sides, greddy front, gialla grill, cf hood, hks single exhaust, headers. also was thinking about buying coilovers to lift the car back up to stock.

 

^those are all fine, i think

 

You don't have to raise your car to get your alignment to spec, assuming you have camber and toe adjustments.

Don't forget though, your front license plate has to be at a certain height from the bottom. 11.5 or something. All I did was made some brackets to raise it up, then took it off after it was recon'd.

 

http://www.forumshawaii.net/vbb/forumdisplay.php?f=241

 

call me up and we can meet up i'll let you know what will past. I done this alot of times. pmed number.

 

i also thought the car has to be 6 inches from the ground or something. and mine definitely isnt.

 

they measure from the middle of your license plate to the ground has to be at least 22inches from the center of the lic. plate to the ground. idk about the coilovers i don't think they pass. but for bodykit wise they wont pass it unless you got the stock bumper brackets still in place. cause thats considered as cosmetics other than that, your exhaust should be alright to pass.

 

so i guess i just need some alignment and to put my front plate back on and im good to go. I have the stock bumper reinforcements there. do I also need the thinfoam pieces to be there? those i took out.

 

dude the foam, everything what ever you took out has to be put back, just in case they do a something or they ask you to pop up yah hood and they scope out yah front kit, and yes its a necess to put back your front plate its lol its illegal to drive without yah front plate. but if anything one of the guys posted up the forumshawaii link on recon laws.

 

cool thanks for the help guys. so i need to put the front license plate back on(which i knew i should have) haha, change my headlight bulbs, and a camber kit. and i think i should be good.

 

im still using binder clip method for the front plate. honolulu cops are that harsh?

 

yup pretty harsh. they gave me hassles the other day. i just dont know if my car will pass the suspension test. i can buy the camber kits but the 350z stechs are pretty stiff i dont know if they have enough travel.

 

suspension test will pass, i have the same setup or had. I loosened up my tokico to very loose. I watched him push the rear of the car down and it barely moved .5 inches.

He will also test your tint, if you have any.

Recon is pretty basic if you have the basics down. Alignment, Front License Plate Height, Tint, and Suspension test.

Make an appointment.