JWT pop charger
#1
11-25-2003 | 10:46 PM
JWT pop charger
does anyone have any experience with the JWT Pop Charger w/ Heat Shield. it can be seen here: http://www.performancenissanparts.co...roducts_id=235
i remember hearing someone say that it is esentially the same thing as the Stillen high flow box. its got the venturi ring and everything, but it costs about half the price. personally, i like it because it takes air from the stock location, and it has a heat shield. the only concern I have with it is whether the heeat shield actually does anything as it looks like just a piece of bent metal. does it actually effectively block off a section of the engine compartment? or is it just a stupid piece of metal like what it looks like.
if paired with a ztube, this thing seems liek it has potential. any input guys?
G35S 6MT
Technosquare ECU
350Z Springs & Struts
6-wire ground kit
i remember hearing someone say that it is esentially the same thing as the Stillen high flow box. its got the venturi ring and everything, but it costs about half the price. personally, i like it because it takes air from the stock location, and it has a heat shield. the only concern I have with it is whether the heeat shield actually does anything as it looks like just a piece of bent metal. does it actually effectively block off a section of the engine compartment? or is it just a stupid piece of metal like what it looks like.
if paired with a ztube, this thing seems liek it has potential. any input guys?
G35S 6MT
Technosquare ECU
350Z Springs & Struts
6-wire ground kit
#2
11-25-2003 | 11:02 PM
Registered User
Joined: Apr 2003
Posts: 331
Likes: 0
From: Northeast
Re: JWT pop charger
I got that combo. The pop-charger and 350z-tube. Sounds great after 3k rpm when you're getting on it. Couldn't tell you if the heat-shield does anything, but it seems fine. There was an article in Car and Driver that stated "the cheapest intake (JWT pop-charger), also produces the best gains...
#3
11-25-2003 | 11:02 PM
Registered User
Joined: Apr 2003
Posts: 331
Likes: 0
From: Northeast
Re: JWT pop charger
I got that combo. The pop-charger and 350z-tube. Sounds great after 3k rpm when you're getting on it. Couldn't tell you if the heat-shield does anything, but it seems fine. There was an article in Car and Driver that stated "the cheapest intake (JWT pop-charger), also produces the best gains...
#4
11-25-2003 | 11:04 PM
#7
01-19-2004 | 12:57 PM
Registered User
Joined: Jan 2004
Posts: 151
Likes: 0
From: NJ
Re: JWT pop charger
I am not sure JWT makes one for the G, it is something I read on the web. I am starting to think it is just the heat shield that was referenced, not an entire enclouser. I don't think JWT makes a heat box to mimic the Stillen.
03 - Black - Premium - Wood - Aero w/ Spoiler
Z Tube - Stillen AirBox
03 - Black - Premium - Wood - Aero w/ Spoiler
Z Tube - Stillen AirBox
Thread
Thread Starter
Forum
Replies
Last Post
