I replaced my stock resonator with a magnaflow one.
Sounds good and not to loud.
realy nice
hope mods leave this here cause not all sedan guys check the exhaust forum.
heres the link https://g35driver.com/forums/intake-...ml#post3357995
Sounds good and not to loud.
realy nice
hope mods leave this here cause not all sedan guys check the exhaust forum.
heres the link https://g35driver.com/forums/intake-...ml#post3357995
Former G35driver Vendor
nice shorts, Dave....
The magnaflow does sound good. May have to try this out.
The magnaflow does sound good. May have to try this out.
Registered User
G35Papa
Registered User
close
- Join DateJun 2003
- LocationNorCal
- Posts:14,505
-
iTrader Positive Feedback100
-
iTrader Feedback Score(85)
-
Likes:662
-
Liked:451 Times in 305 Posts
I added your sound clip post to the Aftermarket exhaust compliation sticky
Thanks for sharing
Thanks for sharing
Registered User
Wold anyone recommend replacing the resonator if I already have the coupe mid pipe? It sounds pretty good as it is now, but I wouldn't mind a little bit more grunt. I do not want any additional drone or excessive noise.
Registered User
I'm afraid that removing the resonator would produce ugly rasp, something I really want to avoid. I wouldnt want it to produce a generic deep tone either, I much prefer something distinct and attractive sounding. Not sure if a Magnaflow resonator would fulfill all my wants.
This is just a magnaflow resonator added to the stock exhaust, in place of the stock resonator nothing else.
The resonator was a direct in size fit but had to be welded in by a shop.
It was 50$ on ebay and 50 to get welded on.
And the coupe midpipe is the same pipe as the sedan just the resonator is diffrent. So yes the magnaflow one can be put in the coupe midpipe.
I thought about putting a pipe in place of the resonator but as worried about rasp, so i spent the extra 50$
here is a link to the resonator I bought
http://cgi.ebay.com/ebaymotors/ws/eB...055426466&rd=1
Ill be adding a y-pipe and intake to the setup next week
Current mods in video are 5/16 spacer , magna flow resonator and z-tube.
The resonator was a direct in size fit but had to be welded in by a shop.
It was 50$ on ebay and 50 to get welded on.
And the coupe midpipe is the same pipe as the sedan just the resonator is diffrent. So yes the magnaflow one can be put in the coupe midpipe.
I thought about putting a pipe in place of the resonator but as worried about rasp, so i spent the extra 50$
here is a link to the resonator I bought

http://cgi.ebay.com/ebaymotors/ws/eB...055426466&rd=1
Ill be adding a y-pipe and intake to the setup next week

Current mods in video are 5/16 spacer , magna flow resonator and z-tube.
Registered User
The only difference between the coupe/sedan midpipes is the type of resonator? (Besides the shielding used to produce a flat underpan).
