hey guys need some non-foulers for my kinetix cats, what kinda non-foulers should i get? any from ebay? If anyone makes it on here, i can buy it off you. lemme know

 

They are like $5 at any autoparts store

 

^ +1, I got mine from Autozone when I had my TP's.

 

ok cool. thanks

 

You shouldn't need them with cats.

If you have a CEL, it suggests there may be a air leak.

 

I have headers as well. I have read that the older version of kinetix HFC get the CEL. btw how can i check for an air leak?

 

Put the car up on a lift while its idling.

Take a 3 foot length of 1/4" ID vinyl tubing and slip fit one end if it onto a 2 foot long piece of 1/4" copper tubing.

This will be your leak detection stethoscope. place the vinyl tube next to your ear and use the copper tube to poke it around suspected leak areas. When the copper tube is placed near the leak, you will hear a loud increase in noise comming from the vinyl tube.

You can also bend the end of the copper tube to reach around corners and other hard to reach areas.

 

What are you CEL codes?

 

the only code im getting is p0430

 

P0430 = Catalyst System, Bank 2

At least its isolated to one side.

 

yea, so it should be a bit easier to diagnose.

 

Btw jus went to autozone, and there were so many sparl plugs spacers. Anyone know what size i would need?

 

"have headers as well"
Hopefully you won't get caught during the visual portion of CA emission test or be charged with Felony Emission tampering.

 

yes hopefully

 

I think it's 9002. I know there's a thread on the size here somewhere because that's how I found it, just look around for non-fouler threads.