Momentum Headers
#16
^^ I threw a code once with the ART pipes but that was because there was steal wool inside the 02 bung that needed to be removed so that the 02 sensors could read the fumes. I was just getting a low output but now the CEL is gone and hasnt come back.
I had berk HFC before as well. Never threw a code with those. But I would say the gain from HFC to ART pipes were noticeable.
I had berk HFC before as well. Never threw a code with those. But I would say the gain from HFC to ART pipes were noticeable.
#17
#19
#20
Attention
My headers arrived today and was surpised to see that they did not come with any hardware what so ever like the ad states. No big deal in my book considering the price I payed for them.
-So there is the fair warning to anybody else that got a set or plans on buying them.-
No problem if you plan on having a shop do your install as they well most likely use new stuff but I plan on doing it myself like eveything else. So I called up my local Infiniti dealer and ordered new exhaust manifold gaskets, new catalytic converter gaskets(top), and new nuts to bolt down to the head studs...$147.13 later. I made a DIY header install thread if you plan on trying to do this yourself.
https://g35driver.com/forums/intake-...r-install.html
Cheers
-So there is the fair warning to anybody else that got a set or plans on buying them.-
No problem if you plan on having a shop do your install as they well most likely use new stuff but I plan on doing it myself like eveything else. So I called up my local Infiniti dealer and ordered new exhaust manifold gaskets, new catalytic converter gaskets(top), and new nuts to bolt down to the head studs...$147.13 later. I made a DIY header install thread if you plan on trying to do this yourself.
https://g35driver.com/forums/intake-...r-install.html
Cheers
Last edited by 04WhiTe_G_Coupe; 07-22-2012 at 10:33 PM.
#21
The following users liked this post:
Footballmania32 (07-17-2012)
#25
I believe it, from everything Ive read about the install and comments from other people on the subject it sounds pretty detailed and a royal pain in the ***. I actually cant wait to start it just cuz of those reasons though. You can say that you successfully made the cut for DIY header install completion.
#26
So I successfully installed my headers today in the 100+ degree sun. Not counting the 1 hour break I took to eat a quick bite it took 10 hours altogether. Started at 9am and had it all buttoned up at 8pm. It is a job I'll tell ya that. I will post more on it tomorrow as well as the DIY as I am tired and sore...lol.
#28
If I remember the flanges are not the same.
Thread
Thread Starter
Forum
Replies
Last Post
Albanian122
Engine - Exhaust
5
09-05-2015 11:23 AM