Spacer, MREV2 or both??
#1
Spacer, MREV2 or both??
I've got a 2006 RevUp engine with a 5/16 spacer. I was about to buy a MREV2 to go with it because I thought that the combination was the best hp gain. I've seen the dyno linked from the motordyne website but I can't find any other info. I was recently told that I only need one or the other and that the combination of the two isn't worth it. So the question is what provides the best hp increase: a 5/16 spacer alone? MREV2 alone? or both together?
#2
#3
from tony at motordyne
Hi WhiteonWheat,
I don't recall using the words "Massive gains" to describe the MREV2/spacer combination, but when used on a REVUP engine it will certaintly be the best bolt-on short of nitrous or FI.
It will make a minimum of 15HP/18TQ in the upper midrange. Many people have dynod in excess if 20HP/30TQ.![Biggthumpup](https://g35driver.com/forums/images/smilies/biggthumpup.gif)
I don't recall using the words "Massive gains" to describe the MREV2/spacer combination, but when used on a REVUP engine it will certaintly be the best bolt-on short of nitrous or FI.
It will make a minimum of 15HP/18TQ in the upper midrange. Many people have dynod in excess if 20HP/30TQ.
![Biggthumpup](https://g35driver.com/forums/images/smilies/biggthumpup.gif)
#4
MREV2 & 5/16 spacer was one of the best breather mods Iv'e done to my car.
U can really feel the power diff in the higher rpm ranges.
Well worth the money, esp if u can buy them used. Def get both.
U can prob get the MREV2 used for about $350 and with some patience u can do the install yourself.
U can really feel the power diff in the higher rpm ranges.
Well worth the money, esp if u can buy them used. Def get both.
U can prob get the MREV2 used for about $350 and with some patience u can do the install yourself.
#6
#7
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
FreshVQ
The G-Spot
4
09-30-2015 01:41 PM