Carbon Fiber Roof (Overlay)
also i already knew you were using a cloth, i just wanted to know if u had a place i could get one with weaves like that. If you dont wanna give out ur "secret" till ur project is done, thats fine, just let me know when you get a chance, thank you.
Originally Posted by Hi-Tech_G
HKS has a full carbon fiber Lexus IS300 and Mitsubishi EVO
A carbon fiber G or Z would like kind of hot!
A carbon fiber G or Z would like kind of hot!
problem is those cars are fully in cf!
Joined: Nov 2005
Posts: 760
Likes: 1
From: North Hollywood, CA
Originally Posted by JdM_G35
dude i didnt know u were wrapping ur trunk too, why? just buy a real cf trunk, it would only cost a little bit more if not the same, but it would be real, and light.
I had the CF trunk on my accord before and it rattled like crazi. So, overlay would be ok.. 
BTW I'll give you guys the contact number......
Joined: Nov 2005
Posts: 760
Likes: 1
From: North Hollywood, CA
Originally Posted by b00stedjustin
A little ricey me thinks. You guys and your stickers lol.
I don't think ricers can even afford this? But whatever you say man. It's all good!! and btw! It's NOT a STICKER!
Joined: Nov 2005
Posts: 760
Likes: 1
From: North Hollywood, CA
Originally Posted by JOKER
this ads allllllllllotf of weight. Is it worth it?
I don't think a LOT of weight!! Just think of painting your car with 3 or 4 more coats in it!
If you gonna show your car, it's Hella worth it!!
Originally Posted by JdM_G35
also i already knew you were using a cloth, i just wanted to know if u had a place i could get one with weaves like that. If you dont wanna give out ur "secret" till ur project is done, thats fine, just let me know when you get a chance, thank you.
get the 2x2 twill
you will need the polyester resin, the surface agent, the MEKP, the pigment and such.
cant find the 2x2, the surface agent, the MEKP, the pigment and such
i dont need any of the fillers od i since im painting the roof black first?
im doing this at the shop, lol so ima do it myself.
First i need the cloth which is the 2x2 right?
then i lay it doesnt and add resin...the polyester resin....but which one? gloss?
then i let it dry and then clear coat and im done?
i dont need any of the fillers od i since im painting the roof black first?
im doing this at the shop, lol so ima do it myself.
First i need the cloth which is the 2x2 right?
then i lay it doesnt and add resin...the polyester resin....but which one? gloss?
then i let it dry and then clear coat and im done?
Last edited by JdM_G35; Apr 11, 2007 at 12:04 PM.
what do you do , wait for it to dry up a bit roll it then sand it down ? I have never worked with carbon before just fiberglass and bondo. I seen that epoxy has alot of little air bubbles in the mixture, how do you avoid those ?