$5 Door Lock Motor (Actuator) Fix
#123
#124
Registered User
iTrader: (5)
Join Date: Jul 2009
Location: Ellicott City, MD
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the info and diy guys. i really appreciate it! my passenger side actuator crapped out last week - i didn't know what wrong with it until i searched and realized that our early coupes have problems with the actuators. I'll be ordering the $5 fix tomorrow and report back to you guys.
#125
#126
Registered User
iTrader: (2)
Join Date: Jan 2010
Location: so. cal
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
haha heckyes it sux..plus twice ive had the alarm on w/out locking the door & auto started the G, walked up 2 it and opened the door and Bam! Engine shuts off alarms going crazy n ive gotta sht load of attention my way..thankfully the law has not been involved...yet. but good job 2 every1 who's accomplished this because it is a pain n the arsenal..n max i dont know how u did it with the key lock delete thats 1 i hadnt thought of!
#130
Thank you to the original poster for the pointer in the right direction, you rock :-)
Just did this on one of my customers' G35 coupe. Same symptoms as described. Worked like a charm. Took some time to align everything but once all aligned everything went smoothly.
I am an independent mechanic in CT area. If anybody wants me to do this mod on their cars let me know via email
aplusqualityautorepair@gmail.com
I can come to you or you can drop off your car in my location, whatever works,
Nick.
Just did this on one of my customers' G35 coupe. Same symptoms as described. Worked like a charm. Took some time to align everything but once all aligned everything went smoothly.
I am an independent mechanic in CT area. If anybody wants me to do this mod on their cars let me know via email
aplusqualityautorepair@gmail.com
I can come to you or you can drop off your car in my location, whatever works,
Nick.
#132
#133
Great fix
I just got done installing this. Works great, it even sounds strong. Definately need a dremel for this job. One mistake I made was not lining up rod correct at first, make sure rod goes through bouth holes straight. All in all not to hard and definately worth the money in savings. Highly reccomend!
#134