^^^^^^I'm probably using about 12 of these: http://www.superbrightleds.com/specs/FLS.htm
per headlight

 

you have a few options but I prefer to wire mine seperate into a toggle switch.... this way u can turn them on and off as a standalone to your headlight switch (as most led's dont work well with the heat of the D2S bulbs) wiring them is pretty easy....or .... you can splice into your city driving light wires and turn them on and off like that, but they will be on with your headlights as well and might burn out much quicker. I am putting together a DIY for wiring these etc .... PM me if you need any advice etc before i post the DIY (I have a ton of pics and diagrams)

 

thank you soooo much!!! man ive been looking for a DIY on this for a long time. when do you expect to have it up?

 

Looks very clean.

 

a DIY would be great....i have been looking a long time for a DIY for the city lights

 

^ +1

 

im doing another mambers lights maybe next week, ill try to do a writeup

 

For those of you who are using the flex strips around the projector, what do you use to cover up the tiny wiring and letters inbedded within the strips? I was thinking of painting over this with silver paint so it blends in with the shroud. From all the pics I have seen, I cant see any of the raw guts of the strips. While the strips are the easiest, I may end up installing individual LEDs into the shroud itself. All these lights look good guys....

 

OMG Those are ILLLL

 

co sign

 

 

Were can I find a diy write up for this mod?