Im planning on making some custom halo/eyes for my 2004 coupe. Can anyone tell me what diameter these halo/eyes should be?

I also plan to get the headlights painted so ill get a chance to measure them then but if be nice to do all the work at once so i don't have to keep baking my headlights

 

i wanna say 60mm but not 100% sure

 

hahah prolly a good idea if it was 100% since im doing this: http://video.google.com/videoplay?docid=980547339061120203

 

anyone know for sure? both top and bottom light holes of the headlights?

 

Looks pretty easy to do but not a fan of the half ring look. The look is pulled off more with lights that are horizontal but not with the 04 light in vertical orientation. Also, the 04 lights are not round but more oval. Best of luck to you in making these. Make sure you use good LEDs...

 

k i took my headlights apart. ill post the measurements tomorrow

 

ok now these are the measurements or diameter of 2004 headlights for a coupe:

top hole the HID light is a bit more oval so its 3 6/8" ID wide and 3 7/8" high ID.

bottom hole the high beam is 4 2/8" ID

This was measured from the back of the light holes so make sure you make adjustments if your going to have the eyes further up to the front because it gets bigger.

 

I just recieved my last light that I needed, now I can install my Demon Eyes this weekend. I have a clear bra and eyelids on them now so ill be taking them off today. What are your thoughts on blue tinted overlays or should I buy another clear one. I have an 06 BS coupe.

 

bottom 4 3/8in and top is 4in i just measured the shroud out of a set i have in the garage..dont know the mm but you can do the math..hope this helps

 

for what year car? coupe or sedan?

 

Just wanted to say I love you.. BIG HELP