Is it possible to get the final product not polished? I like the aluminum one you made without the polishing, matches the dash it seems.

 

Looks great, I'll get those measurements for u today. I'll take the darker aluminum. So is it possible to engrave "Geemy" on top of the ****? Hopefully it fits the 2nd gen if it does you are god!

 

he is already a savior to all of us 1st gens... this **** looks f-ing amazing. hand down.

 

in for final pricing.

 

I have the aluminum polished and non polished. And that "darker aluminum" one is the titanium , just want to clarify that. Thanks geemy, I should be able to engraved that for you at an additional cost.

 

Photo of the aluminum non-polished?

 

Ok well here's the pic of the 2nd Gen shifter. I hope this is what you needed and I know it's a bit blurry but I hope that doesn't matter



and the circumference is 4.5cm soooooo you can find the diameter if you divide it by Pi supposedly (quick google check) lol

Please let me know if it'll fit the 2nd gen because that's what I have and I want the TI ****

 

Oh oh, I just learned this in school today.

Pi = c/d sooooo...... d = c/Pi soooooo...

d = 1.432394487827058 cm

which is...

d = 0.563934 inches.

BAM! Math...

(BTW the school thing was a joke.)

 

Thank you so much Defratos! I dont think there will be any problem with these fitting Gen 2 models. Your shaft is about .100 bigger than mine lol. I will just have to make the hole size for your models that much bigger. Which I am 99% sure I have the room to do so. So yay!

Here are some pics of the aluminum and Titanium ***** with various finishes.

The first pic are all Aluminum *****. The second pic are all the Titanium *****, and the third pic is a row of alum and a row of ti.

I am swamped at work today so I will have to check back in with everyone later and hopefully I will have the pricing done by then. Im sneaking in this post right now...lol

oh yea and I also sent an email to IB about becoming a vendor, but I have not heard back from them...yet

 

Those pics are great you can really tell the difference between the *****, thanks for sharing them.

I think I may change to Aluminun (non-polished), matches the trim on my interior. But the Titanium is so sexy....haha.

 

One more thing Defratos... Does that white plastic piece come off the top of your shifter as well? I have a blue piece on mine that I am able to just take right off. It allows the **** to sit lower. After taking the plastic piece off there should be a metal one underneath that looks just like the plastic piece (but the metal one is not removable).

 

those ***** are sex

 

Awesome ***** man I may order a titanium one if it looks good in the 2nd gen

 

I just tried taking out the white plastic piece and it ain't budging,

I even tried using my teeth but it doesn't seem to be removable and the measurement I gave was for the lower metal part underneath the plastic piece.

 

Defratos did you remove the Metal Clip that holds on the OEM shifter?? Should be "LIKE" a "C" CLIP