Interior & Exterior Exterior Modifications ; Interior Modifications ; Lighting ; Gauges and More

Led strip running down the side of headlight

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 14, 2011 | 10:13 PM
  #1  
newyorkg35's Avatar
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 38
Likes: 0
From: Rochester, Ny
Led strip running down the side of headlight

Hey guys do you know how to change out the light strip running down the headlight ? I want to put some whiteish blue LEDs in it
 
Reply
Old Apr 15, 2011 | 10:38 AM
  #2  
djfarhan's Avatar
Registered User
15 Year Member
Liked
Loved
Community Favorite
iTrader: (6)
Joined: Aug 2009
Posts: 14,348
Likes: 325
From: Dubai, UAE
^ dont do it
 
Reply
Old Apr 15, 2011 | 10:15 PM
  #3  
Shiftd's Avatar
Registered User
Joined: Nov 2010
Posts: 98
Likes: 2
Try LEDmarkers he might be able to do something. I've heard he is good at making tails so he should do headlights also
 
Reply
Old Apr 15, 2011 | 11:30 PM
  #4  
04G35NYC's Avatar
Registered User
iTrader: (17)
Joined: Jun 2006
Posts: 4,842
Likes: 78
From: Brooklyn,NY
All these Fake Audi side strips are getting so damn played out, in NYC you see it on every type of car.
 
Reply
Old Apr 15, 2011 | 11:38 PM
  #5  
LEDmarkers's Avatar
Former G35driver Vendor
iTrader: (8)
Joined: Mar 2011
Posts: 364
Likes: 16
From: NYC
Yes we do it . I wouldnt say its played out on a g35 because the headlights have a clearance strip from the factory .

http://www.ledmarkers.com/Infiniti.html
 
Reply
Old Apr 15, 2011 | 11:55 PM
  #6  
04G35NYC's Avatar
Registered User
iTrader: (17)
Joined: Jun 2006
Posts: 4,842
Likes: 78
From: Brooklyn,NY
^ sorry, i wasn't saying specifically about G35. I meant i have seen so many other cars doing it, its getting played out on other cars. G35 for now it's not played out. Btw, this is Chris right with the White sick IP coupe that was repainted from DG? Do you do projector retros at all i know it doesn't say you do it i am just curious.
 
Reply
Old Oct 29, 2012 | 09:58 PM
  #7  
blues3531's Avatar
Registered User
Joined: Apr 2012
Posts: 193
Likes: 10
From: St. Louis
Old thread but I have a question. The OEM side strip is out on one of my lights. How do you replace that and what kind of bulb is it? I'm prob gonna be getting 06 projectors in the next 3 months or so, so is it not worth the hassle and just leave it as it is for now?
 
Reply
Old Nov 13, 2012 | 01:29 PM
  #8  
Texas-G's Avatar
Registered User
Joined: Nov 2012
Posts: 78
Likes: 0
Originally Posted by blues3531
Old thread but I have a question. The OEM side strip is out on one of my lights. How do you replace that and what kind of bulb is it? I'm prob gonna be getting 06 projectors in the next 3 months or so, so is it not worth the hassle and just leave it as it is for now?
+1 i have the same issue my driver side one is out.
 
Reply
Old Nov 19, 2012 | 09:40 PM
  #9  
Duinit's Avatar
Registered User
Joined: Nov 2011
Posts: 29
Likes: 3
unfortunately you have to take the whole frontend off like you were changing a headlight. It takes a blade bulb #168. Best off changing them both out while you got it apart
 
Reply
Old Nov 19, 2012 | 09:45 PM
  #10  
Texas-G's Avatar
Registered User
Joined: Nov 2012
Posts: 78
Likes: 0
Originally Posted by Duinit
unfortunately you have to take the whole frontend off like you were changing a headlight. It takes a blade bulb #168. Best off changing them both out while you got it apart
is there a DIY thread on how to do it? search hasnt brought anything up
 
Reply
Old Nov 23, 2012 | 11:21 AM
  #11  
Duinit's Avatar
Registered User
Joined: Nov 2011
Posts: 29
Likes: 3
It's more time consuming than it is difficult. I just had mine all apart and replaced all headlight bulbs as a HID bulb burnt out
1. pull out bottom three plastic pop rivets on inside of fenderwell
2. up on top inside of bumper there is two screws on each side to remove
3. remove all plastic pop retainers on bottom of bumper
4. remove two pop retainers that hold grill and two bolts that hold bumper on. The bumber cover should come off now.
5. Each headlight is held in place with 4 bolts, two in the front, one on the side and one on the top. Headlight assembly should come out now which will give you acess to all the bulbs.
Hope this helps you!!!
 
Reply
Old Nov 23, 2012 | 11:46 AM
  #12  
Texas-G's Avatar
Registered User
Joined: Nov 2012
Posts: 78
Likes: 0
Originally Posted by Duinit
It's more time consuming than it is difficult. I just had mine all apart and replaced all headlight bulbs as a HID bulb burnt out
1. pull out bottom three plastic pop rivets on inside of fenderwell
2. up on top inside of bumper there is two screws on each side to remove
3. remove all plastic pop retainers on bottom of bumper
4. remove two pop retainers that hold grill and two bolts that hold bumper on. The bumber cover should come off now.
5. Each headlight is held in place with 4 bolts, two in the front, one on the side and one on the top. Headlight assembly should come out now which will give you acess to all the bulbs.
Hope this helps you!!!
thanks alot!
 
Reply
Old Nov 25, 2012 | 12:21 AM
  #13  
laksjd84's Avatar
Registered User
iTrader: (26)
Joined: Oct 2008
Posts: 1,344
Likes: 11
From: Chicago
why so you can look like an audi?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mike730
General Tech Questions
1
Jan 12, 2018 04:25 PM
bTanz
G35 Coupe V35 2003 - 07
16
Oct 15, 2015 02:31 PM
Fireman07603
G35 Coupe V35 2003 - 07
16
Aug 9, 2015 06:00 PM
neight
Exterior - Body Parts
0
Aug 2, 2015 03:01 PM
Tylerttn
G35 Coupe V35 2003 - 07
4
Jul 14, 2015 10:11 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 04:39 AM.