Interior & Exterior Exterior Modifications ; Interior Modifications ; Lighting ; Gauges and More

HID upgrade from Halogen

Old Nov 17, 2004 | 07:56 PM
  #1  
Npapajohn's Avatar
Thread Starter
|
Registered User
Joined: Nov 2004
Posts: 2
Likes: 0
From: Mobile, AL
HID upgrade from Halogen

I have an '03 Sedan without the HID package. How hard and is it possible to put HID on it with the packages that are on the web. Either a used setup from another G35 or a kit is what I've seen but I don't know what goes into doing it?

 
Reply
Old Nov 17, 2004 | 08:23 PM
  #2  
G35Lin's Avatar
Multi-Spoked Mod
Staff Alumni
iTrader: (3)
Joined: Oct 2002
Posts: 3,360
Likes: 0
From: Ca, USA, Torrance
Re: HID upgrade from Halogen

hum...most of them are plug and play. I will be putting a set of Euro Optix on soon. I have mine on order. Top and bottom! 8k. should look very nice!

Ed

2003 Transport V35SKYLINE. Team Transport! www.teamtransport.org
 
Reply
Old Nov 17, 2004 | 11:19 PM
  #3  
boostedinfinity's Avatar
Registered User
Joined: Nov 2004
Posts: 23
Likes: 0
Re: HID upgrade from Halogen

yea you can upgrade it easily. It'll say what type of bulb u have and just get the same bulb as in a plug and play upgrade

 
Reply
Old Nov 18, 2004 | 01:44 PM
  #4  
al503's Avatar
Registered User
iTrader: (9)
Joined: Dec 2002
Posts: 1,477
Likes: 0
From: Beaverton Oregon
Re: HID upgrade from Halogen

i upgraded my early sedan and it wasn't that difficult. It'll take about 1-3 hours depending on the tools you have at your disposal. I got my kit from hid-online.com and it was the 6000K ultinon kit. It was a night and day difference and worth every penny.

Where do you live? If in the NW, I can help you put it in.

Abbreviated Process:
1. jack up car and remove wheel (optional on the wheel but makes it much easier to work)
2. attach power cables to + battery
3. attach - ground wire to car chassis/frame
4. install ballast with zip ties and/or double sided tape to flat surface
5. attach wiring harness (+ battery and - chassis wire) to ballast.
6. attach bulb to ballast
7. drill hole into plastic cap behind the headlight assembly
8. push bulb through cap and install in headlight assembly.

Done.

It sounds a little more complex than it really is.

 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KruZZe
New Members Check In
14
Feb 27, 2023 05:04 PM
g.spot
G35 Cars
12
May 9, 2016 10:54 PM
NyCrAzY
Brakes & Suspension
13
Oct 1, 2015 09:19 AM
twentyeggs
G35 Sedan V35 2003-06
8
Sep 11, 2015 03:58 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:12 AM.