Debadging Rear Infiniti Logo
#16
#17
#18
Originally Posted by G-Kid
does the infiniti logo on the back of the car have that adhesive stuff on the back? or is that on with screws?
very important, i dont wanna screw up my ride because of a stupid mistake
very important, i dont wanna screw up my ride because of a stupid mistake
#19
Originally Posted by G-Kid
does the infiniti logo on the back of the car have that adhesive stuff on the back? or is that on with screws?
very important, i dont wanna screw up my ride because of a stupid mistake
very important, i dont wanna screw up my ride because of a stupid mistake
The emblem attached with 2-sided tape (something specifically for auto emblems and trim - 3M is what I use)... If you are rebadging with a set that has been black chromed (or whatever else) you'll need to apply the tape yourself. If you are applying a new set from the dealer they will already be taped.
Make sure you use a "sedan" emblem - since the coupe one has no pins (for the holes) and is a tiny bit smaller.
The letters are all two-sided tape only. I'm not sure if the coupe and sedan sizes are different - they might be since the sedan trunk is bigger (so make sure you order for sedan, in case they are different sizes).
As beebo said above, you can search for ways to remove and apply... if you have questions, ask away - that’s what the forum is for.
Happy modding
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
#20
#21
Originally Posted by G-Kid
ok so let me make sure im getting this all, i shouldnt have a problem removing the logo? i know the letters will come off smoothly i just want to make sure the logo will as well
Its good to let it sit in the sun for a few hours to help the process.
#24
Originally Posted by Beebo
Is it yours? The holes behind the emblem had to be shaved
it is, but when i bought it it was like that. i actually bought it from a member of the forum, neil376. its an 05 sedan, and from what i remember hearing it wasnt an easy task debadging it. it came out really nice tho
#25
Re: Holes behind Mt. Fuji Logo
I just debadged my 2007 g35x. All coupes have no holes behind mt. fuji badge. Sedans have holes from 2003-2006. 2007 and newer, no holes.
I have no ghosting. I used hair dryer, fishing line (dental floss breaks), Goo Gone in small intervals followed by 50% rubbing alcohol and 50% water. The Goo Gone will haze the clear coat if you apply too long without neutralizing with alcohol/water mixture.
The letters all were simple to remove without evidence, but the mt. fuji emblem take care with. I had a friend help me, we went in steps.
Wax after with a hand wax. Should be good.
I have no ghosting. I used hair dryer, fishing line (dental floss breaks), Goo Gone in small intervals followed by 50% rubbing alcohol and 50% water. The Goo Gone will haze the clear coat if you apply too long without neutralizing with alcohol/water mixture.
The letters all were simple to remove without evidence, but the mt. fuji emblem take care with. I had a friend help me, we went in steps.
Wax after with a hand wax. Should be good.
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM
netcbc
Steering & Suspension CDN
0
07-24-2015 11:25 AM