Kuruma bumper is here
Kuruma bumper is here
Got it today and I must say its like a OEM bumper! Im going 400 grit it tonight in a few spots and shoot it tomorrow night. If anyone is on the fence about this dont be its a great bumper!
Ok for those of you that want to know how to remove the front bumper. There are about 10 10mm screws under the car that hold the under fairing on. You will need to remove these first. Then on the sides of the bumper near the wheels are two 10mm screws that are also phillips. These hold the bumper to the fender, these will also need to be removed. I find it best to use a long phillips screwdriver to get to these. Pull the iner liner out enough to get to them. Once done with these you can move on to the clips on top of the bumper. These can be removed with a flat head screwdriver. The bumper will now come off. Pull it off just enough to set it on the ground in front of the car. Now its time to remove the side signals on the sides of the bumper, just twist and pull the bulb out. Thats it! If I missed anything feel free to correct me.
yeah i got mine today too. .its getting prepped and painted tomorrow ill have pics later in the.. week hopefully i figure out where to put my oil cooler
Trending Topics
Awesome Steve, you might have to cut some of the foam on the reinforcement bar to fit it unless you don't want to retain it. I would post pics of mine but my digicam is down right now so its up to you show everyone once again..
Originally Posted by G352NV
Im not one really for taking pics of the car right now. Im holding off really until I hit a few shows.
No worries, best of luck on the upcoming shows.. Hopefully we'll see some pics of your car in the magazines..
Originally Posted by G352NV
Im not one really for taking pics of the car right now. Im holding off really until I hit a few shows.
