When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Had a few questions on this ****, here is the link. http://m.ebay.com/itm/121536567152?nav=SEARCH They are $31.99 free shipping. Their used, but the one I received is practically brand new. Couldn't find a scratch on it.
Had a few questions on this ****, here is the link. http://m.ebay.com/itm/121536567152?nav=SEARCH They are $31.99 free shipping. Their used, but the one I received is practically brand new. Couldn't find a scratch on it.
Just got this momo off eBay for $31. Never mind the half finished cf, it's a work in progress.
I installed mine last month and happy with the way it looks...even without my Formula Drift bandana. haha
Here's a pic:
The only issue I had was how loose it feels after securing it to shifter. The problem is, the 2pc aluminum isn't exactly a tight fit, so I made my own spacer to fill in the gap. I also modified the rubber cap by cutting the top off to place on top of clicker, and the other half for the screws. Other than that, for $30 you can't beat it.
OK so as I scrolled through every single post of this thread, I couldn't find an answer. I literally just bought a 6mt console (just the ashtray hazard and shifter area piece) come to realize it might not fit. I have a 06at and I kinda need this piece to fit. If it doesnt fit, who here has rigged it so that you don't have to remove the PRND plate but can also have a flush bootboot maybe overtop of it? Maybe I'll just quick cement the gaps or some stupid ****. I was drunk and had an OHH OHH moment and now I can't cancel my order so I gotta make this work.
Here is my set up: OEM shift boot from 350z and ring from 350z shifter bezel with momo aluminum shift **** ($30 on eBay) I got the bezel on eBay for $25! A good price compared to $200 from the factory
i bought the momo for mine...but on the 06 it has the boot that connects to the bottom of the oem shift **** anyone have a clue how to take that little chrome square connector off so i can just tuck the oem boot over the bottom of the momo shift ****?
Were you successful in getting the Momo on your 06? I am having having difficulties taking off that connector piece. Can you give a brief description on how to remove the connector piece?