set the limit switch after the regulator and/or motor have been removed for any reason.....here is the procedure as per esm


1. with the door open, lift up and hold the power window switch until the door glass is fully closed.
2. get inside the vehicle and close the door.
- you need to close the door so the door switch is fully depressed
3. press and hold the reset switch. while holding the reset switch, press down and hold the power window switch until the door glass is fully opened.
4. release the reset switch. then, lift up and hold the power window switch until the door glass is fully closed.
5. open the door to release the door switch. the door glass should partially move down.

**do not use the window auto function.
**do not release the switch before the window is fully stopped

 

where is the reset switch?

 

its on the window motor, you need to remove the door panel and there is a black round sticker covering up the switch. it's on the metal inner door skin

 

Thank You it worked perfect

 

Thanks.

 

anyone that needs any other procedures....just lmk and ill post em up when i get to work and check out the esm.

 

Is this procedure for sedan or coupe? Are they the same