Notices

The interior tear down and build up.

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #46  
Old 10-07-2012, 08:36 PM
Frankieg35's Avatar
Registered User
iTrader: (41)
Join Date: Oct 2006
Location: South Jersey
Posts: 17,256
Received 856 Likes on 744 Posts
I was gonna put bostons in mine also.. how deep are the speakers?? I was thinking if they dont fit there I could get an adapter and put them in the 6x9 spot..
 
  #47  
Old 10-07-2012, 09:01 PM
guitarrocker98's Avatar
Registered User
Thread Starter
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
Um..... I have a 2 inch spacer on mine so they fit right. Don't put them in the 6x9 spot that section is worthless. Just cover those holes with sound killer. If you gunna run Boston's I think you have plenty of room.
 
  #48  
Old 10-07-2012, 09:25 PM
Frankieg35's Avatar
Registered User
iTrader: (41)
Join Date: Oct 2006
Location: South Jersey
Posts: 17,256
Received 856 Likes on 744 Posts
Where did u get the spacer??
 
  #49  
Old 10-07-2012, 11:12 PM
guitarrocker98's Avatar
Registered User
Thread Starter
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
Online. I got it off eBay. If the re speakers fir with no issues ill send them out to ya, but I'm months away from finishing my build
 
  #50  
Old 10-08-2012, 12:11 AM
Frankieg35's Avatar
Registered User
iTrader: (41)
Join Date: Oct 2006
Location: South Jersey
Posts: 17,256
Received 856 Likes on 744 Posts
Ok kool, I'm in no rush anyway.. Lol
 
  #51  
Old 10-11-2012, 03:21 AM
guitarrocker98's Avatar
Registered User
Thread Starter
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
Originally Posted by guitarrocker98
Just picked these up. The wiring is slightly different. The gtr seats actually have less wires below. Therefore I am a little confused
, but i will figure it out. Also the rails don't match up like at all so I'm going to have to put the factory g35 ones on.
 
  #52  
Old 10-11-2012, 11:22 PM
guitarrocker98's Avatar
Registered User
Thread Starter
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
I got the gtr brackets off of the passenger seat today. I'm going to get the lemon brackets off the g35 seats and we will see how it all turns out. I'm now really sure how its going to go. Also I have a question if I use 3m di noc on my entire dash is that to much? I think it might be, but since my entire interior will be decked out it could look good. If not does alcantara fade. I can't get a concise answer.
 
  #53  
Old 10-12-2012, 12:12 AM
Frankieg35's Avatar
Registered User
iTrader: (41)
Join Date: Oct 2006
Location: South Jersey
Posts: 17,256
Received 856 Likes on 744 Posts
Don't do that fake carbon fiber, it will look tacky..
 
  #54  
Old 10-12-2012, 03:29 AM
guitarrocker98's Avatar
Registered User
Thread Starter
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
K since it seems your the only one looking at the thread do you know if alcantara fades?
 
  #55  
Old 10-12-2012, 11:23 AM
Frankieg35's Avatar
Registered User
iTrader: (41)
Join Date: Oct 2006
Location: South Jersey
Posts: 17,256
Received 856 Likes on 744 Posts
I'm not 100% but I would say eventually it will, just tint all your windows including the windshield or get the top of the dash covered in leather or sumtin and do the suade on the lower panels..
 
  #56  
Old 10-12-2012, 10:05 PM
dunstopnow's Avatar
Registered User
iTrader: (2)
Join Date: Jun 2012
Location: California
Posts: 167
Received 3 Likes on 3 Posts
Nooo to vinyl CF. Sub'd for future
 
  #57  
Old 10-13-2012, 12:17 AM
guitarrocker98's Avatar
Registered User
Thread Starter
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
I won't do the dash. May use some vinyl. Also I can't tint my windshield. It would be to hard to see for me.
 
  #58  
Old 10-14-2012, 08:08 PM
guitarrocker98's Avatar
Registered User
Thread Starter
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
OKAY!!!!! So I was looking at the seat rails. If you swap the rails from the g35 seats to the GTR Its looking like it will all bolt up fine. I am just eyeballing things as of now. The GTR rails are shorter by about an 3 inches, so I cant just mod those to work. I was hoping to be able to keep the G5 seats and just sell them off, but thats not looking like a possible plan anymore. O well.
 
  #59  
Old 10-14-2012, 09:14 PM
Frankieg35's Avatar
Registered User
iTrader: (41)
Join Date: Oct 2006
Location: South Jersey
Posts: 17,256
Received 856 Likes on 744 Posts
U can sell the seats without the rails..
 
  #60  
Old 10-14-2012, 10:10 PM
TIAN's Avatar
Hold The Line

iTrader: (20)
Join Date: Oct 2006
Location: SFL
Posts: 17,779
Received 622 Likes on 406 Posts
In for progress and support
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: The interior tear down and build up.



All times are GMT -4. The time now is 06:53 AM.