When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
How does one install a airbag to this? Is it something the everyday man can do, or shops only?
If I remember correctly it's just two screws under plastic caps either side of the steering wheel that hold the airbag in place. With those removed the airbag comes straight out after disconnecting two wires. Of course, make sure the battery is disconnected and pump the brake - to drain any residing power - and give it 5 mins or so before continuing. One nut holds the wheel to the spline, easily removed with the wheel lock engaged and a breaker bar.
If I remember correctly it's just two screws under plastic caps either side of the steering wheel that hold the airbag in place. With those removed the airbag comes straight out after disconnecting two wires. Of course, make sure the battery is disconnected and pump the brake - to drain any residing power - and give it 5 mins or so before continuing. One nut holds the wheel to the spline, easily removed with the wheel lock engaged and a breaker bar.
