Ok so i installed:

Philips 5000k D2S Projector Bulbs
PIAA Xtreme White Plus 4000k H1 - Fogs
PIAA High Intensity LEDs 168W - Clears

They were originally kinda F'd up....but i spent a little time tweakin' em around etc...and finally got them to work!

Image 1: All Messed Up
Image 2: Fixed
Image 3: Projectors - Low-Beam
Image 4: Projectors - High-Beam
Image 5: Projectors, Fogs, and Clears all On

 

OHH MAN.. do u have 2 register on the other site? s der any way that u can clip it to the forum?


thanx.

 

Fixed

 

Why was it messed up in the first pic? The bulb not seated correctly?

Your beam seems to be aimed a bit low, you should be able to see farther than that.

Try to post some pics of the beam pattern against a wall from more than a few feet away. It's hard to tell beam patterns when the car's right against the wall.

 

done!

Image 1- Lows
Image 2- Highs

 

this is on a 06? I didnt know that the cutoff was THAT bad.

 

something doesn't look right!

 

Good choice on the 5K hids. It does look like you should adjust the beam (raise it a bit) and even them up while you're at it...

 

How do i go about adjusting them to be higher?
Do i just go back into the fender wall / back of the headlight to adjust them?

 

put bags of sand in your trunk... lots of them.

 

for my 06 projectors there are 2 8mm nuts behind each headlights...turn them to adjust

 

definitely adjust the lights more to the right of the road, from your picture it seems to cover most left side.

 

What are your thoughts on the PIAA extreme force??

 

there is an 8mm bolt behind the lights (one for fog, one for hid). turn it to adjust.

or was it 10mm

no i think it was 8mm...