Front side marker as the Turn Signal
I did mine this morning. Took about 45 minutes for the passenger side while I figured out how I wanted to do it, and maybe 15 for the driver side. Mine is basically invisible except for the wire splice up near the main headlight connector. I soldered and wrapped the wire extension and put it back in the sleeve.
BTW, I had a Purple/White wire on the passenger side and Green/White on the driver side (05 Sedan). I think I'm going to do the rear marker as well.
BTW, I had a Purple/White wire on the passenger side and Green/White on the driver side (05 Sedan). I think I'm going to do the rear marker as well.
You probably can do it with the rears. I'm looking in to it. BTW, what LED's are you running? I bought some 11 SMT bulbs from v-leds.com, but I'm not real happy with how they look, so I'm back to the stock amber bulbs in my clear corners. I want the entire lens to be filled with color, and the LEDs were either very intense or almost non-existent.
I'm using LED's from V-leds. I forget which ones exactly but I'll check when I get home.
I might try to do the rears today. I'm thinking that the same theory from the front could be applied to the rear?
I might try to do the rears today. I'm thinking that the same theory from the front could be applied to the rear?
I just did this mod yesterday evening. I been meaning to do it since I got the JDM clear corners with the "bump". finally figured I would do it since I was changing the oil too.
Thanks for the info everyone!
Thanks for the info everyone!
Buckeye, I'm using the license plate LED's they offer.
http://v-leds.com/Exterior-LED/Corne...81133-1-2.html
I also just did the rears, looks a lot better
I'll be posting a DIY tonight.
http://v-leds.com/Exterior-LED/Corne...81133-1-2.html
I also just did the rears, looks a lot better
I'll be posting a DIY tonight.
check out my led corners w/ blinkers. PM me about details as well
https://g35driver.com/forums/media-s...inker-mod.html
https://g35driver.com/forums/media-s...inker-mod.html
Buckeye, I'm using the license plate LED's they offer.
http://v-leds.com/Exterior-LED/Corne...81133-1-2.html
I also just did the rears, looks a lot better
I'll be posting a DIY tonight.
http://v-leds.com/Exterior-LED/Corne...81133-1-2.html
I also just did the rears, looks a lot better
I'll be posting a DIY tonight.Thread
Thread Starter
Forum
Replies
Last Post
Micale757
Lighting
6
Apr 8, 2020 10:46 AM




