Originally Posted by infinus

I just replaced my fog's yesterday, it was pain in the ***. you have to remove the fender liner in the wheel well to get access to the lights, you need to remove one screw and 4 or 5 clips, and it helps if you jack up the car a little or remove the wheel.

Originally Posted by BlueDevilBAMF

I did the fogs once on my '04 headlights. You're right - a jack would make the job much easier.

The damn housing for the fog is so small/tight that i ended up scraping away the skin on my thumbs just trying to put the damn bulb in. Should've worn latex gloves but that may not even have helped... I've still got small scars on each thumb knuckle

Originally Posted by infinus

Yeah me too, it seems every time I touch my car I bleed. I think when I make my mods list I'm including the 5 gallons of blood I must have lost...

btw everyone if you are going to buy some use coupon code CLUBLEX for 10% off your order

Originally Posted by BlueDevilBAMF

Which website is that for?

BTW i just swapped over my 194/168 High Power white LEDs from my '04 clearance strips to my '06 driving lights. Looks really good.

Only problem is now my left fog doesn't work. It's possible it just burnt out, but I know it worked last week. Oh well. The fogs are an ugly yellow and I don't use them anyway. Unlike on the '04's they're not needed for high beams.

Originally Posted by Rhino_111

Hey guys. I swapped out my clearance strip (city lights) with single directional 194s and think they look great. I used the same ones for the side markers and the plates as well. http://www.v-leds.com/Shop/Control/P...32235246235248 I used the exact same ones you linked to for my domes and courtesy lights in the doors but used blue instead of white. I am happy with the results and they are plenty bright at night using single direction output as the lens on the city and sides do help spread the light a bit. If you want total coverage a single bulb will never do it. You will have to go with CCFL or multiple LED strips. Both have been done so search for CCFL and it should give you some examples. Its not exactly a plug n play option though and definitely more time and money will be involved. For now, I have attached some pictures of mine as examples. Hope that helps.

Originally Posted by stradaONE8

Thanks a bunch Rhino, you totally resurrected this thread
The pictures really help, so thanks for posting those as well as your opinion.
I think the forward firing lights look fine too and will probably pick those up, I wish there was a mini tower that would spread a bit more in the sidemarkers, but it seems like they look fine.
Sadly I have an '06 and I don't have the clearance light like you. The city light I was referring to was the one in the fog-light housing that flips on along with your headlights when the fogs are off to illuminate that reflector slightly.
I hate the yellow in that particular bulb, but I just went and noticed even the stock filament bulb is pretty forward firing...so whatever. I suppose I'll just order em.

Everyone else, post up some pics too...

Originally Posted by stradaONE8

^ That's fantastic, do post some pics! I'm sure it looks great.

I just placed my order for the domes and under door along with the 3 pairs of 194/168s for city, sidemarkers, and plates.
I can't wait until they come in so I can get rid of the ugly yellowness.

Originally Posted by BlueDevilBAMF

You're going to be really happy with the difference... LEDs were the first mods (aside from clear corners) I did and they clean up/personalize the look of your car so much. They're well worth it!

Originally Posted by elayman

^ what bulbs did you use inside your headlight housing? I found these, are they bright enough?

http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481