06 projectors not plug an play?!
#31
#32
Success! I took out the igniter harness from the old lamps and put them in the new ones and it works. I saw that yellow ground wire. I just unclipped it from the harness. Now I'm going to put my 04 lamps on sale.
This time I took off the whole bumper because I couldn't put it on properly last time. The steps are the same as the DIY except you jack up your car and take out the underbody panel and the fender liners. I used a power tool so it was quick to screw/unscrew. So when you take off the whole bumper (instead of tilting it) you don't have to put the painters tape on the fender because you pull it straight out. It's also easy to take the headlamp out.
Thanks
This time I took off the whole bumper because I couldn't put it on properly last time. The steps are the same as the DIY except you jack up your car and take out the underbody panel and the fender liners. I used a power tool so it was quick to screw/unscrew. So when you take off the whole bumper (instead of tilting it) you don't have to put the painters tape on the fender because you pull it straight out. It's also easy to take the headlamp out.
Thanks
#34
#35
The projectors make my car look up-to-date. But I'm a little disappointed because the bulbs are still 4300k. I wish they would've upgraded the bulbs to 6000k like the BMWs and Acuras.
Thread
Thread Starter
Forum
Replies
Last Post