Headlight Wiring...............
#16
http://www.nicoclub.com/FSM/G35/Sedan/2004/lt.pdf
The links INTERNALLY in the PDF don't always work. Sometimes you have to go back to the root www.NICOCLUB.com/fsm/g35/sedan/2004 and manually click on the section you want.
The links INTERNALLY in the PDF don't always work. Sometimes you have to go back to the root www.NICOCLUB.com/fsm/g35/sedan/2004 and manually click on the section you want.
#17
#18
#19
So in the headlight wiring is there a wire that will light up the led when I turn the parking lights on?
#21
#23
I have halo rings that I will put in the front of the bezel and inside the bezel. Then I have another strip of Single led's that I will put on the inside as close to the front as possible so I can get the reflection on the lens and I have 2 blue led's that will light up each projector and make it look like a blue demon eye. I am also putting 2 of these blue led's in the turn signal.
#24
#25
oh wow... lol that is going to look nice!! Maybe you should ask for more opinion on this. I didn't know that you were going to put that much on there. This is what i did with mine, and there was already a short on power i believe. I soldered all my wires together also.
The reason I went with so many is because I have been looking at different retros and picked and chose what I liked and put them in mine. The blue demon eye will be hooked up seperate to a remote. So I can turn them on when I want. All others will be connected through the parking light so that they come on at the same time. I will make sure I am getting enough juice before I close it and seal it. Thanks for the advice!!
#27
130mm but htat is still way to small for the bezel.
Thread
Thread Starter
Forum
Replies
Last Post