Another 06 projectors thread *pics*

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 13, 2006 | 11:29 AM
  #136  
G 12IDE's Avatar
Registered User
Joined: Sep 2005
Posts: 13
Likes: 0
From: Port Barrington
Where can i get projectors

Hey do you know where i can get the projectors...and is it a easy install...and was it worth getting the projectors
 
Reply
Old Mar 13, 2006 | 11:39 AM
  #137  
jtesensky's Avatar
Registered User
Joined: Sep 2002
Posts: 214
Likes: 0
From: Scottsdale, AZ
Definatley worth it, you can get it here: 06 Projector Housings

The install is a bit involved, it's a pain in the a$$ getting the lamps out. The harness clips are under the headlamps & there isn't much slack to pull them out far enough to see the push clip on the bottom. I felt around with a pocket screwdriver to get the clips pushed in enough to release them.
 

Last edited by jtesensky; Mar 13, 2006 at 12:00 PM.
Reply
Old Mar 13, 2006 | 12:18 PM
  #138  
escobar929's Avatar
Registered User
iTrader: (9)
Joined: Nov 2004
Posts: 14,074
Likes: 3
From: Hollywood, FL
Originally Posted by G 12IDE
Hey do you know where i can get the projectors...and is it a easy install...and was it worth getting the projectors
the install isnt too bad. as far as where to get them from, shop around. you can find them for ~$550
 
Reply
Old Mar 13, 2006 | 12:34 PM
  #139  
PhxBlue's Avatar
Thread Starter
|
Polyester Pileup FTW!
iTrader: (3)
Joined: Jan 2005
Posts: 1,419
Likes: 1
From: The Valley, AZ
Congrats Joe! One of the best mods (if you wanna call it that) out there.
 
Reply
Old Mar 13, 2006 | 12:43 PM
  #140  
jtesensky's Avatar
Registered User
Joined: Sep 2002
Posts: 214
Likes: 0
From: Scottsdale, AZ
Originally Posted by PhxBlue
Congrats Joe! One of the best mods (if you wanna call it that) out there.
It was instant gratification!
 
Reply
Old Mar 13, 2006 | 12:45 PM
  #141  
PhxBlue's Avatar
Thread Starter
|
Polyester Pileup FTW!
iTrader: (3)
Joined: Jan 2005
Posts: 1,419
Likes: 1
From: The Valley, AZ
The first night I had mine I went on a 2 hour drive... I couldnt stop enjoying them.
 
Reply
Old Mar 14, 2006 | 02:11 PM
  #142  
Gilley's Avatar
Registered User
iTrader: (7)
Joined: Apr 2004
Posts: 8,001
Likes: 8
From: Orlando, FL
I have caused at least one person to go buy them since seeing mine and several others want them.

My club had a meet a couple of weeks ago and I was constantly asked to turn them on and show them off.

BTW, they are really easy to aim once they are in. Mine were a little too high.

PM SFLG35 for info on a great deal on them.
 
Reply
Old Mar 14, 2006 | 02:34 PM
  #143  
chester's Avatar
Registered User
Joined: Dec 2004
Posts: 496
Likes: 0
From: Florida
.

so i could aim the headlights after i install them right? people say it's too low and people say it's too high when they put it on// do u just go by your own judgement. Finally whats up with philip ultinons 6000k for 100 dollars on ebay... a knocker? hmm...
 
Reply
Old Mar 14, 2006 | 02:58 PM
  #144  
PhxBlue's Avatar
Thread Starter
|
Polyester Pileup FTW!
iTrader: (3)
Joined: Jan 2005
Posts: 1,419
Likes: 1
From: The Valley, AZ
Yes you can aim them after you put them on. It takes an 8mm socket wrench. To adjust the aim up or down just look for this silver looking screw on the back of the housing once you have them installed. I also did a search on ebay and did not find the item you were talking about.

 
Reply
Old Mar 14, 2006 | 03:23 PM
  #145  
_jb's Avatar
_jb
Photographer
Joined: Nov 2002
Posts: 5,050
Likes: 0
From: St.Pete, FL
Premier Member

Originally Posted by Gilley
I have caused at least one person to go buy them since seeing mine and several others want them.
I can verify that statement...

I already wanted them, but seeing them installed on Sean's LR Coupe at the FGC Meet was the deciding factor for me.
 
Reply
Old Mar 14, 2006 | 04:39 PM
  #146  
Gilley's Avatar
Registered User
iTrader: (7)
Joined: Apr 2004
Posts: 8,001
Likes: 8
From: Orlando, FL
Welcome to the seeing and looking better at night club, jb.
 
Reply
Old Mar 14, 2006 | 07:46 PM
  #147  
escobar929's Avatar
Registered User
iTrader: (9)
Joined: Nov 2004
Posts: 14,074
Likes: 3
From: Hollywood, FL
just got done installing my 06 projectors, but one of them doesnt work

the pass side projector doesnt light up neither does the turning signal. the fog and city light work.

havent checked the bulbs just cause its already dark out and i was tired and frustrated. but even if i do, wouldnt be able to tell.

any one got any ideas???
 
Reply
Old Mar 14, 2006 | 10:01 PM
  #148  
PhxBlue's Avatar
Thread Starter
|
Polyester Pileup FTW!
iTrader: (3)
Joined: Jan 2005
Posts: 1,419
Likes: 1
From: The Valley, AZ
A reason for that is totally unknown to me especially if your headlights were working fine prior to this. My only thought would be that you dont have the individual bulbs plugged all the way in.
 
Reply
Old Mar 14, 2006 | 10:13 PM
  #149  
chester's Avatar
Registered User
Joined: Dec 2004
Posts: 496
Likes: 0
From: Florida
g

just got my h1 piaa ... the yellow ones.. ion i think i don't have it beside me but i am debating if i should keep it.. or go with the Xtreme white... i just wanted to have a diff color and not all white but.. thinking about about it now.. i also got my piaa 168 white
 
Reply
Old Mar 14, 2006 | 11:05 PM
  #150  
PhxBlue's Avatar
Thread Starter
|
Polyester Pileup FTW!
iTrader: (3)
Joined: Jan 2005
Posts: 1,419
Likes: 1
From: The Valley, AZ
Chester do you like to drive with your fogs on? If not then I think you would find those yellow ion bulbs to be very useful in inclement weather when you actually turn them on. If you like having the fogs on then I would agree that white bulbs look better for all around appearance.
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:15 PM.