When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Car was totaled but was able to pull these off. All parts were on the car or less then 6 months and have had no issues running. This was my first DIY audio install so everything was crimped nothing was soldered.
My JDM Double Din Dash Kit was slightly warped during the accident but still lines up and allowes you to install an after market double din deck. All buttons work. This was the non-nav version.
My Prioneer AVH-X5700BHS 7-inch comes with the original box, manual, remote control, and all other paper work. I have the screws for both this and the dash kit but the only thing missing is the mic which I was not able to remove from the vehicle due to its placement. It also has the following pre-wired:
Metra ASWC1 - Steering Wheel Controller
Metra Antenna adapter
Metra 70-7550 Wiring Harness(non-bose)
I know the wiring is shitty but this was my first time and I had never planned on taking it off the car. It would not be difficult to either repurchase new wires or cut and redo the ones I have made.
Car was totaled but was able to pull these off. All parts were on the car or less then 6 months and have had no issues running. This was my first DIY audio install so everything was crimped nothing was soldered.
My JDM Double Din Dash Kit was slightly warped during the accident but still lines up and allowes you to install an after market double din deck. All buttons work. This was the non-nav version.
My Prioneer AVH-X5700BHS 7-inch comes with the original box, manual, remote control, and all other paper work. I have the screws for both this and the dash kit but the only thing missing is the mic which I was not able to remove from the vehicle due to its placement. It also has the following pre-wired:
Metra ASWC1 - Steering Wheel Controller
Metra Antenna adapter
Metra 70-7550 Wiring Harness(non-bose)
I know the wiring is shitty but this was my first time and I had never planned on taking it off the car. It would not be difficult to either repurchase new wires or cut and redo the ones I have made.
09-27-2015 | 05:02 PM
