Glex25 Official Build thread
#256
Joined: Feb 2010
Posts: 5,249
Likes: 430
From: Houston
Itasha Coupe
#259
#260
Theres alot of little things that would drive me nuts though. Like how come they shot primer without smoothing the wheel well opening on the front? There a point at the top and the whole wheel opening isnt a continuous circle, its all jagged. And I noticed a few other things around the rear that should have been taken care of before primer. And someone else brought up the waves by the side marker.... Hopefully they address and fix all that little stuff before laying base.
Waiting for wheel pics....
Waiting for wheel pics....
#261
Nothing wrong with laying down the primer before if your using a 2 part glazing putty to smooth out the waves . Some waves will always go unnoticed until they have a even coating to see it . They could have just did a guide coat but its fine either way . I do hope they used a epoxy primer though cuz it will prevent body work from coming back out after painting better and give you a harder base for basecoat/clearcoat . After all that work they should remove the windows before painting .
#262
Nothing wrong with laying down the primer before if your using a 2 part glazing putty to smooth out the waves . Some waves will always go unnoticed until they have a even coating to see it . They could have just did a guide coat but its fine either way . I do hope they used a epoxy primer though cuz it will prevent body work from coming back out after painting better and give you a harder base for basecoat/clearcoat . After all that work they should remove the windows before painting .
Its a beautiful build but you gotta finish A before you move on to B. I despise sanding and finicky prep work. I personally would rather do it right instead of sanding/grinding that all down to make it flawless after the fact.
#264
Joined: May 2005
Posts: 4,654
Likes: 75
From: New Jersey
The waves are one thing... but look at that front wheel arch, not pretty.
Its a beautiful build but you gotta finish A before you move on to B. I despise sanding and finicky prep work. I personally would rather do it right instead of sanding/grinding that all down to make it flawless after the fact.
Its a beautiful build but you gotta finish A before you move on to B. I despise sanding and finicky prep work. I personally would rather do it right instead of sanding/grinding that all down to make it flawless after the fact.
Right now it's rough and all the minor details will be gone over
He keeps going from one side back to the other
if he likes the way it came out on the other side better
#269
Joined: May 2005
Posts: 4,654
Likes: 75
From: New Jersey
If you look at my history thread
https://g35driver.com/forums/picture...band-only.html
I have done clear corners
I have also shaved the side marker
Now that we are going with a darker color
I wanted to go back to Amber side markers
Every car I have seen that are a darker color
the amber side markers have looked good.
https://g35driver.com/forums/picture...band-only.html
I have done clear corners
I have also shaved the side marker
Now that we are going with a darker color
I wanted to go back to Amber side markers
Every car I have seen that are a darker color
the amber side markers have looked good.