Pic request: 25mm spacers on OEM 19s
#46
02-25-2009, 01:48 PM
Registered User
Join Date: Oct 2007
Location: Boston
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
#47
02-25-2009, 01:52 PM
Actually it's not a necessity but it makes sense since you'll go through tires like no ones business due to the uneven wear from the neg camber.
The Z Htechs are less of a drop an hense most people don't feel a camber kit is needed since the neg camber is far less and tire wear will not be as prominent.
There is always those exceptions though where the Z Htechs drop the ride more than expected.
I personally have had the Z Htechs for the last 8k miles and haven't noticed any wear but thats not that many miles I suppose either.
#48
03-03-2009, 02:25 AM
#50
03-10-2009, 01:48 PM
negative camber will allow the wheels to stick out more, but the bottom and thus the top wud be MORE tucked in if ur going negative camber.. unless u want to do.. POSITIVE camber.
#57
06-05-2009, 04:01 PM
#58
06-06-2009, 03:37 AM
Registered User
Join Date: May 2009
Location: jersey
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
i have an 03 and want to drop it and give the back a lil aggressive look i was thinkin bout:spacers 20mmfront/25mm rear i have oem 18 it hits a little hard and just want to make the ride smoother i dont wanna get a camber kit and dont wanna roll my fenders i was thinkin of 1 inch drop no more maybe less and do want to get 19 in the future any suiggestions
#59
06-11-2009, 04:18 AM
Registered User
Join Date: May 2009
Location: jersey
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
ooh ooh ooh i wanna contribute
Front
Rear
Full shot, not THE best shot but trust me it looks SO much better in person
these are ichiba v2 spacers from the vendor b2autodesigns on here 25mm all around
and with my height i had to roll my rear fender
i first had 30mm spacers but NO thanks i think anything bigger than a 25 mm on the stock wheels just looks really bad, ya 25mm all around is not COMPLETLY flush but its a nice look without going making the wheels look like something their not
Front
Rear
Full shot, not THE best shot but trust me it looks SO much better in person
these are ichiba v2 spacers from the vendor b2autodesigns on here 25mm all around
and with my height i had to roll my rear fender
i first had 30mm spacers but NO thanks i think anything bigger than a 25 mm on the stock wheels just looks really bad, ya 25mm all around is not COMPLETLY flush but its a nice look without going making the wheels look like something their not
#60
06-11-2009, 09:54 AM
well i have bc racing coilovers, im at 3 3/4 inches off the ground at the sideskirts but the exhaust and stuff hangs lower in a sense and i did have to roll my fenders but do me a favor go to your fender and measure from that to the ground like at the top of the fender that is close to the tire and measure it to the ground, it should be around 29 inches but let me know for sure and ill let u know how much i lowered the car
and yah i got cusco front arms and spc rear
and yah i got cusco front arms and spc rear