JK Tech 1pc FORGED Wheels...NEW
#1
10-04-2005, 06:08 PM
Join Date: May 2005
Location: Phillips Ranch, Southern California
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
JK Tech 1pc FORGED Wheels...NEW
Hey all...
The pictures are of JK Tech's 1-piece FORGED wheels on my Sedan. I'm good friends w/ the owners of JK Tech, so let them use my car for the test-fitting.
19x8.5 (front)
19x9.5 (rear)
RESULTS:
The fronts will require about half-inch spacer (which will also necessitate longer studs) due to brake-caliper clearance. This problem will be addressed on next production run.
The rears fit PERFECTLY! As you can see from the pictures, the wheel looks gorgeous on the G35. Deep, beautiful lip...clean, understated design. It is a typical mesh-spoke design, but never gets played out...especially since these are FORGED, they're not heavy like the typical CAST wheels out there.
WANT SOME?!?! PM me or email...I will get you good hook up!
They are currently only available in 19x8.5 & 19x9.5.
Fitments available:
5x112mm (Audi & M-Benz)
5x114.3mm (most Japanese)
5x120mm (BMW) (this wheel was originally designed specifically for M3)
The pictures are of JK Tech's 1-piece FORGED wheels on my Sedan. I'm good friends w/ the owners of JK Tech, so let them use my car for the test-fitting.
19x8.5 (front)
19x9.5 (rear)
RESULTS:
The fronts will require about half-inch spacer (which will also necessitate longer studs) due to brake-caliper clearance. This problem will be addressed on next production run.
The rears fit PERFECTLY! As you can see from the pictures, the wheel looks gorgeous on the G35. Deep, beautiful lip...clean, understated design. It is a typical mesh-spoke design, but never gets played out...especially since these are FORGED, they're not heavy like the typical CAST wheels out there.
WANT SOME?!?! PM me or email...I will get you good hook up!
They are currently only available in 19x8.5 & 19x9.5.
Fitments available:
5x112mm (Audi & M-Benz)
5x114.3mm (most Japanese)
5x120mm (BMW) (this wheel was originally designed specifically for M3)
#4
10-04-2005, 07:57 PM
#6
10-05-2005, 04:13 AM
Registered User
#7
10-05-2005, 02:27 PM
Join Date: May 2005
Location: Phillips Ranch, Southern California
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Sorry 'bout the pictures of only half the car...The reason they're like that is 'cause the front wheels didn't clear (remember how I said it needed about half-inch spacer?)...so, my friend just kept taking shots of the rear half of the car.
I will get all the tech-spec's on them & post in a couple of days...been so busy at work that I hardly get to post & read here anymore. =(
Then again, that means there are lots of people buying BMW's huh? Hehehe....so I guess its a good thing I'm busy!
Aloha...
I will get all the tech-spec's on them & post in a couple of days...been so busy at work that I hardly get to post & read here anymore. =(
Then again, that means there are lots of people buying BMW's huh? Hehehe....so I guess its a good thing I'm busy!
Aloha...
Trending Topics
#13
11-20-2005, 11:15 PM
Join Date: Apr 2005
Location: St Augustine, FL
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM
