Dumped That B*tch!

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #31  
Old 06-27-2008 | 07:12 PM
NorthSideRacing's Avatar
Registered User
iTrader: (4)
Joined: Feb 2006
Posts: 2,033
Likes: 1
From: the woodlands,tx
oh yea! Dumped Not Found!!!!

You can still make it over speed bumps
 
  #32  
Old 06-28-2008 | 05:55 AM
pickrice's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jun 2008
Posts: 79
Likes: 1
From: San Francisco
will post better pics later on. thanks to those who had something smarter to say.
 
  #33  
Old 06-28-2008 | 10:50 AM
Gilley's Avatar
Registered User
iTrader: (7)
Joined: Apr 2004
Posts: 8,001
Likes: 8
From: Orlando, FL
I went with a comination of OEM unrevised 350Z springs in the rear and 350Z S-Tech springs up front because the rear was dumped too much, like yours.

It's a good thing you don't have the front splash guards. Mine scrape on nearly every speed bump.
 

Last edited by Gilley; 06-28-2008 at 03:31 PM.
  #34  
Old 06-28-2008 | 03:18 PM
pickrice's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jun 2008
Posts: 79
Likes: 1
From: San Francisco
how's the ride on those?
 
  #35  
Old 06-28-2008 | 03:20 PM
SteveBlake's Avatar
Registered User
iTrader: (6)
Joined: Jul 2007
Posts: 2,476
Likes: 5
From: Houston, TX
Originally Posted by NorthSideRacing
oh yea! Dumped Not Found!!!!

You can still make it over speed bumps
Haha this was a smart thing to say, because your car isn't very low at all.. sorry man.
 
  #36  
Old 06-28-2008 | 04:36 PM
nghiars's Avatar
Registered User
iTrader: (7)
Joined: Apr 2006
Posts: 5,342
Likes: 10
From: SoCal 714
Originally Posted by Gilley
I went with a comination of OEM unrevised 350Z springs in the rear and 350Z S-Tech springs up front because the rear was dumped too much, like yours.

It's a good thing you don't have the front splash guards. Mine scrape on nearly every speed bump.
do you still have the 350z s-tech rears tah u might wanna sell... im running on tanabe df210s and i like the drop but the rear gap is a bitt smaller than the front
 
  #37  
Old 06-29-2008 | 02:31 PM
pickrice's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jun 2008
Posts: 79
Likes: 1
From: San Francisco
Originally Posted by SteveBlake
Haha this was a smart thing to say, because your car isn't very low at all.. sorry man.
yeah, well there's no need to be a d*ck about it. sorry man.
 
  #38  
Old 06-29-2008 | 02:42 PM
NorthSideRacing's Avatar
Registered User
iTrader: (4)
Joined: Feb 2006
Posts: 2,033
Likes: 1
From: the woodlands,tx
Pickrice. I wasnt being a dick about my comment. My comment stands and its true. this vehicle ISN'T dumped,Its lowered.
 
  #39  
Old 06-29-2008 | 02:52 PM
pickrice's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jun 2008
Posts: 79
Likes: 1
From: San Francisco
that's why i changed my title to dropped.. just got a little bit too excited when i was writing all this down.

here's my audi wagon.. i can't make it over speed bumps and definitely cannot get into a car wash.. believe me i found out the hard way.. once again sorry for the blurry pics.

 

Last edited by pickrice; 06-29-2008 at 03:03 PM.
  #40  
Old 06-29-2008 | 08:11 PM
FutureGDriver's Avatar
Registered User
Joined: Apr 2007
Posts: 1,284
Likes: 3
From: Boston, Mass
Originally Posted by pickrice
that's why i changed my title to dropped.. just got a little bit too excited when i was writing all this down.

here's my audi wagon.. i can't make it over speed bumps and definitely cannot get into a car wash.. believe me i found out the hard way.. once again sorry for the blurry pics.


NICCE now dat dumped!!!
 
  #41  
Old 06-30-2008 | 02:30 AM
pickrice's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jun 2008
Posts: 79
Likes: 1
From: San Francisco
Originally Posted by FutureGDriver
NICCE now dat dumped!!!
hahaha! thanks.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
yosip1115
Engine, Drivetrain & Forced-Induction
16
09-28-2015 05:14 PM
GBoy
The Q - Spot
3
09-05-2015 04:15 AM
Herbbie Hablib
Forced Induction
5
08-11-2015 07:22 PM
amthar
Audio, Video & Electronics
5
11-08-2005 01:10 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 04:45 PM.