Mods in progress
#48
---Updatd pics on page 1---Did a test fit of the Enkei G37 wheels today, but only on one side - the pics look a bit funny cauz I have the 19s on one side and my oem 17s on the other -(4x4)- fitment was good, spacers not needed - tein coilovers are set to be installed Thursday - will have more updated pics with the drop a week from today...
#52
#53
#55
#58
thx guys..
wow 2" all around - thats lowww - its my daily driver so was thinkn 1.5 front 1.3 rear - is your car 2.5 front 2 rear ??? do you have front/rear camber kits??
Had body shop tap weld holes, sand, paint etc...
https://g35driver.com/forums/body-in...ier-holes.html
Originally Posted by G35papa
Really diggin the G37s on there Chevis. The drop on coilovers is going to really make it aggressive. Make sure you go for at least 2" all around....2.5 upfront and 2 in the rear
wow 2" all around - thats lowww - its my daily driver so was thinkn 1.5 front 1.3 rear - is your car 2.5 front 2 rear ??? do you have front/rear camber kits??
Originally Posted by JNTHNsG35
did you fill in the hills yourself? care for a DIY?
https://g35driver.com/forums/body-in...ier-holes.html
#59
Registered User
iTrader: (85)
Originally Posted by Chevis
thx guys..
wow 2" all around - thats lowww - its my daily driver so was thinkn 1.5 front 1.3 rear - is your car 2.5 front 2 rear ??? do you have front/rear camber kits??
wow 2" all around - thats lowww - its my daily driver so was thinkn 1.5 front 1.3 rear - is your car 2.5 front 2 rear ??? do you have front/rear camber kits??
You are going to have coilovers...even if you go with your moderate 1.5 & 1.3, eventually you will drop it more
Mine use to be my daily too up until about 4 months ago when I finally got a commuter.
DO IT! (last emoticon for good measure lol )