Walds on my Sedan
#1
Walds on my Sedan
I know I've been lagging on the pics, but I haven't had the time for a real photoshoot. I'll post up these pics that were taken from the various meets I have been at. Oh and the car was DIRTY in the pics, I apologize!
Tein Basic Coilovers, 20mm spacers, SPC front and rear camber kit, and a OEM front lip coming soon.
My car is the second one from the bottom. Curtains FTW!
Tein Basic Coilovers, 20mm spacers, SPC front and rear camber kit, and a OEM front lip coming soon.
My car is the second one from the bottom. Curtains FTW!
#3
#5
ENVautoDetailing.com
iTrader: (47)
Joined: Sep 2005
Posts: 9,257
Likes: 136
From: San Diego/Redondo Beach
take off the rear splash guards, they're severely taking away from the look you're going for. You need clean and simple lines. The front lip would be a good addition though. And unless you plan on running an extra degree of camber from what you're at now, there's no way you're getting a 20mm spacer in the rear.
-GP-
-GP-
#7
Trending Topics
#11
You need to slam it...another 1.5" upfront and 1" in the rear....tuck the wheels a bit.
I don't think you'll need spacers at all in the rear. Lower it and then have it aligned (after you get the camber kit installed), you should be flush....are your fenders rolled? You could probably do a 10mm upfront to flush them out....again, after more drop
If I was doing up a VIP....remove the rear emblem.....add a IS300 lip spoiler to the rear (to help the transition of the blacked top trunk lid) and also remove the fogs in the grille...also like what already been said....front lip, remove splash guards.... Just my 2 cents.
I don't like big faced rims but those actually don't look half bad....again, would look better when you slam it
I don't think you'll need spacers at all in the rear. Lower it and then have it aligned (after you get the camber kit installed), you should be flush....are your fenders rolled? You could probably do a 10mm upfront to flush them out....again, after more drop
If I was doing up a VIP....remove the rear emblem.....add a IS300 lip spoiler to the rear (to help the transition of the blacked top trunk lid) and also remove the fogs in the grille...also like what already been said....front lip, remove splash guards.... Just my 2 cents.
I don't like big faced rims but those actually don't look half bad....again, would look better when you slam it