OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
#1771
ill Sedan
iTrader: (87)
Donpisto
Wheel spec
20x9.5 -12
20.10.5 +0
Tires225/35
Camber: Front camber is -4.7 and rear camber is -7.5
Fender Work:rear were rolled flat, pulled and flared upward (upward flare not needed/not beneficial).
Gtfever:
Wheel Specs:
19x9+4
19x10-1
Tires:
215/35
225/35
Camber: -3 camber upfront and -4 out back
Fender work: Pulled
4drmadness
Wheel Specs:
Volk Winnings
19x9.5 +17
19x10.5 +19
Tires:
225/35/19
235/35/19
Camber: -3.8 back and -2.4 front
Fender work rolled flat
STCLAIRWEST
Wheel Spec:
19x9.5 +17
19x10.5 +9
Tires:
225/35/19
245/40/19
Camber: -2.5(fr) -2(r)
Fender Work: Pulled
dz n.u.t.z
Wheels Spec:
TE Rep
19x9.5 + 7
19x10.5 +22
Tires:
235/35/19
265/30/19
Wheel Spec:
Challenges
19x9.5 + 16
19x10.5 +23
Tires:
Nexens 245/35/19
Dunlop 275/30/19
Camber: -3.3
Fender work: Pulled
4DGS
Wheel Specs:
19x9 +10
19x10 +17
Tires:
Falken Fk452 215/35/19
Falken FK452 225/35/19
Camber: 2.3 all around
Fender Work: Mild roll
sag35777
Wheel Specs
19 x 9 +15
19 x 10 +15
Tires:
nexen 3000 235/35
nexen 3000 245/35
Camber: ???
Fender work:???
Johnnyone
Wheel Specs:
19x9 +9
19x10 +20
Tires:
Toyo Proxes T1R 225/35/19
Toyo Proxes T1R 245/35/19
Camber: -3.5 all around
Fender Work: Pulled
FlyingLumpia
Wheel Specs:
19x9 +32 with a 15mm spacer
19x10 +32 with a 10mm spacer
Tires:
225/40
255/35
Camber:???
CandlestickPark
Wheel Specs:
19 x 8.5 +0 (25mm spacer)
19 x 9.5 +10 (20mm spacer)
Tires:
Yokohama S-drive 225/35/19
Yokohama S-drive 235/35/19
Camber: -4 all around (estimate)
Fender Work: Rears pulled 5mm, fronts pinched flat and flared a bit
NAT&FFec
Wheel Specs
19x8.5+22
19x9.5+22
Tires:
255/35/19
255/35/19
Camber:-2F/-3R
Fender work: Rears rolled flat fronts pulled
TycoRC
Wheel Spec:
19x8.5 +20 JLBMotorsport Apollo's
19x9.5 +20
Tires:
Nexen N3000235/35/19
Nexen N3000245/35/19
Camber: -3.3 Front -3.75 Rear
Fender Work: Rolled very flat
#1773
ill Sedan
iTrader: (87)
#1774
Lol...camber will remain the same, or at least try to. Gonna have the fender hit the tire if anything and not worry about trying to clear the rim this time.
I think vivek will be more aggressive in the front by 3mm and the rear I'd be a tad more aggressive if he goes with the spacers he mentioned. Will have to double check with him.
BTW Monard, it's -12...get it right!!! Tangina mo! lol jk
I think vivek will be more aggressive in the front by 3mm and the rear I'd be a tad more aggressive if he goes with the spacers he mentioned. Will have to double check with him.
BTW Monard, it's -12...get it right!!! Tangina mo! lol jk
#1780
ill Sedan
iTrader: (87)
#1783
Undecided on the rears right now. Fronts will be a 235/30 and rears I'm still debating on. Talked with Monard and some suggestions right now are 245/30, but I was thinking a 235/35 at first. I'll talk it over with him and John (Cookie Monster) to see their thoughts since they'll be working on my fenders.
#1785
Lol...camber will remain the same, or at least try to. Gonna have the fender hit the tire if anything and not worry about trying to clear the rim this time.
I think vivek will be more aggressive in the front by 3mm and the rear I'd be a tad more aggressive if he goes with the spacers he mentioned. Will have to double check with him.
BTW Monard, it's -12...get it right!!! Tangina mo! lol jk
I think vivek will be more aggressive in the front by 3mm and the rear I'd be a tad more aggressive if he goes with the spacers he mentioned. Will have to double check with him.
BTW Monard, it's -12...get it right!!! Tangina mo! lol jk
Bakla!!!