hey Marcus, 19x8.5 +30 front 19x10+ 38 rear on 235/35 and 265/30. Wat size spacers should I do f and r? not much camber, pretty even right now? Lowered on bc's.

^So is your camber within spec (-1.X)? How much camber would you like to run? How low are you? Pic of your car at current ride height?

Our list hasn't been updated for a long while. For the guys with agressive stretched setups, please update. This has been useful to many here.

Donpisto
Wheel spec
20x9.5 -12
20.10.5 +0
Tires225/35
Camber: Front camber is -4.7 and rear camber is -7.5
Fender Work:rear were rolled flat, pulled and flared upward (upward flare not needed/not beneficial).

Gtfever:
Wheel Specs:
19x9+4
19x10-1
Tires:
215/35
225/35
Camber: -3 camber upfront and -4 out back
Fender work: Pulled

4drmadness
Wheel Specs:
Volk Winnings
19x9.5 +17
19x10.5 +19
Tires:
225/35/19
235/35/19
Camber: -3.8 back and -2.4 front
Fender work rolled flat

STCLAIRWEST
Wheel Spec:
19x9.5 +17
19x10.5 +9
Tires:
225/35/19
245/40/19
Camber: -2.5(fr) -2(r)
Fender Work: Pulled

dz n.u.t.z
Wheels Spec:
TE Rep
19x9.5 + 7
19x10.5 +22
Tires:
235/35/19
265/30/19


Wheel Spec:
Challenges
19x9.5 + 16
19x10.5 +23
Tires:
Nexens 245/35/19
Dunlop 275/30/19
Camber: -3.3
Fender work: Pulled

4DGS
Wheel Specs:
19x9 +10
19x10 +17
Tires:
Falken Fk452 215/35/19
Falken FK452 225/35/19
Camber: 2.3 all around
Fender Work: Mild roll

sag35777
Wheel Specs
19 x 9 +15
19 x 10 +15
Tires:
nexen 3000 235/35
nexen 3000 245/35
Camber: ???
Fender work:???

Johnnyone
Wheel Specs:
19x9 +9
19x10 +20
Tires:
Toyo Proxes T1R 225/35/19
Toyo Proxes T1R 245/35/19
Camber: -3.5 all around
Fender Work: Pulled

FlyingLumpia
Wheel Specs:
19x9 +32 with a 15mm spacer
19x10 +32 with a 10mm spacer
Tires:
225/40
255/35
Camber:???

CandlestickPark
Wheel Specs:
19 x 8.5 +0 (25mm spacer)
19 x 9.5 +10 (20mm spacer)
Tires:
Yokohama S-drive 225/35/19
Yokohama S-drive 235/35/19
Camber: -3 F, -4R
Fender Work: Rears pulled 5mm, fronts pinched flat and flared

NAT&FFec
Wheel Specs
19x8.5+22
19x9.5+22
Tires:
255/35/19
255/35/19
Camber:-2F/-3R
Fender work: Rears rolled flat fronts pulled

TycoRC
Wheel Spec:
19x8.5 +20 JLBMotorsport Apollo's
19x9.5 +20
Tires:
Nexen N3000235/35/19
Nexen N3000245/35/19
Camber: -3.3 Front -3.75 Rear
Fender Work: Rolled very flat

Fabrikator
Wheel Spec:
20x9.5 +14 (R-disk) Work Gnosis GS-3
20x10.5 +20 (O-disk)
Tires:
Falken FK452 - 235/30/20
Falken FK452 - 255/30/20
Camber -3.3 Front, -6.0 Rear
Fender Work: Front - Rolled very flat and slight pull, Rear - Pulled

o sorry, forgot to mention. camber is within spec, tires sit pretty square. dont have pictures of the new wheels on the car, but here is a old photo to go by. im gonna drop the car half inch to inch from this photo. hope that helps. figured ill being poking, trying not to run much negative camber, but dont mind running camber to pull off the look with 265/30 rear.

I would aim to be at:

8.5 +15 (+30 w 15mm spacer)
10 +28 (+38 w 10mm spacer)

Fronts will need to be pinched flat with a fender finished. Rears will need to be rolled flat.

If the wheels are already on the car you can measure to see if what I've recommended comes close to how you want to run them. If a local friend has spacers you can try different sizes to see how flush you wanna be.

Speeddream
Front: 18X9+2 with a 20mm spacer
Rear: 18x10+9 with a 15mm spacer
Tires:
215-40-18
245-40-18
Camber: N/A yet
Fender: front rolled flat and pulled about 3mm, rear rolled real flat pulled about 3mm

JDM_Cain
Front: 19x9.5+2 with 20mm spacers
Rear: 19x11+24 with 5mm spacers
Tires:
Falken fk452
235/35f
255/35r
Camber: aprox -2.5
Fender: Front rolled flat (side marker bracket modified), rear rolled flat and pulled 5mm

Our list hasn't been updated for a long while. For the guys with agressive stretched setups, please update. This has been useful to many here.

Donpisto
Wheel spec
20x9.5 -12
20.10.5 +0
Tires225/35
Camber: Front camber is -4.7 and rear camber is -7.5
Fender Work:rear were rolled flat, pulled and flared upward (upward flare not needed/not beneficial).

Gtfever:
Wheel Specs:
19x9+4
19x10-1
Tires:
215/35
225/35
Camber: -3 camber upfront and -4 out back
Fender work: Pulled

4drmadness
Wheel Specs:
Volk Winnings
19x9.5 +17
19x10.5 +19
Tires:
225/35/19
235/35/19
Camber: -3.8 back and -2.4 front
Fender work rolled flat

STCLAIRWEST
Wheel Spec:
19x9.5 +17
19x10.5 +9
Tires:
225/35/19
245/40/19
Camber: -2.5(fr) -2(r)
Fender Work: Pulled

dz n.u.t.z
Wheels Spec:
TE Rep
19x9.5 + 7
19x10.5 +22
Tires:
235/35/19
265/30/19


Wheel Spec:
Challenges
19x9.5 + 16
19x10.5 +23
Tires:
Nexens 245/35/19
Dunlop 275/30/19
Camber: -3.3
Fender work: Pulled

4DGS
Wheel Specs:
19x9 +10
19x10 +17
Tires:
Falken Fk452 215/35/19
Falken FK452 225/35/19
Camber: 2.3 all around
Fender Work: Mild roll

sag35777
Wheel Specs
19 x 9 +15
19 x 10 +15
Tires:
nexen 3000 235/35
nexen 3000 245/35
Camber: ???
Fender work:???

Johnnyone
Wheel Specs:
19x9 +9
19x10 +20
Tires:
Toyo Proxes T1R 225/35/19
Toyo Proxes T1R 245/35/19
Camber: -3.5 all around
Fender Work: Pulled

FlyingLumpia
Wheel Specs:
19x9 +32 with a 15mm spacer
19x10 +32 with a 10mm spacer
Tires:
225/40
255/35
Camber:???

CandlestickPark
Wheel Specs:
19 x 8.5 +0 (25mm spacer)
19 x 9.5 +10 (20mm spacer)
Tires:
Yokohama S-drive 225/35/19
Yokohama S-drive 235/35/19
Camber: -3 F, -4R
Fender Work: Rears pulled 5mm, fronts pinched flat and flared

NAT&FFec
Wheel Specs
19x8.5+22
19x9.5+22
Tires:
255/35/19
255/35/19
Camber:-2F/-3R
Fender work: Rears rolled flat fronts pulled

TycoRC
Wheel Spec:
19x8.5 +20 JLBMotorsport Apollo's
19x9.5 +20
Tires:
Nexen N3000235/35/19
Nexen N3000245/35/19
Camber: -3.3 Front -3.75 Rear
Fender Work: Rolled very flat

Fabrikator
Wheel Spec:
20x9.5 +14 (R-disk) Work Gnosis GS-3
20x10.5 +20 (O-disk)
Tires:
Falken FK452 - 235/30/20
Falken FK452 - 255/30/20
Camber -3.3 Front, -6.0 Rear
Fender Work: Front - Rolled very flat and slight pull, Rear - Pulled

Speeddream
Front: 18X9+2 with a 20mm spacer
Rear: 18x10+9 with a 15mm spacer
Tires:
215-40-18
245-40-18
Camber: N/A yet
Fender: front rolled flat and pulled about 3mm, rear rolled real flat pulled about 3mm

JDM_Cain
Front: 19x9.5+2 with 20mm spacers
Rear: 19x11+24 with 5mm spacers
Tires:
Falken fk452
235/35f
255/35r
Camber: aprox -2.5
Fender: Front rolled flat (side marker bracket modified), rear rolled flat and pulled 5mm

Update for mine 19x10.5 et.12 235/35 front 19x10.5 et.22 255/35 rear. Camber -3.4 all around.

Can update mine as well....

20x10.5 +0
20x11 -12
Tires235/30 (front) and 235/35 rear
Camber: Front camber is -5.5 and rear camber is -8
Fender Work:rear were rolled flat, pulled, hammered and flared upward. front was pinched with fender finisher.
Other: This setup requires modified front upper A arms, and modified rear camber and toe arms.

CORNELL
19x10 +10(20mm spacer) VOLK RE30
19X11 +25
235/35 Achilles atr
245/35 Achilles atr
camber: -3 front, -4 rear
fenders rolled flat slight pull

The Stimulation/Donpisto
Wheel spec
20x9.5 -12
20.10.5 +0
Tires225/35
Camber: Front camber is -4.7 and rear camber is -7.5
Fender Work:rear were rolled flat, pulled and flared upward (upward flare not needed/not beneficial).

The Stimulation/Donpisto
20x10.5 +0
20x11 -12
Tires235/30 (front) and 235/35 rear
Camber: Front camber is -5.5 and rear camber is -8
Fender Work:rear were rolled flat, pulled, hammered and flared upward. front was pinched with fender finisher.
Other: This setup requires modified front upper A arms, and modified rear camber and toe arms.


Gtfever:
Wheel Specs:
19x9+4
19x10-1
Tires:
215/35
225/35
Camber: -3 camber upfront and -4 out back
Fender work: Pulled

4drmadness
Wheel Specs:
Volk Winnings
19x9.5 +17
19x10.5 +19
Tires:
225/35/19
235/35/19
Camber: -3.8 back and -2.4 front
Fender work rolled flat

STCLAIRWEST
Wheel Spec:
19x9.5 +17
19x10.5 +9
Tires:
225/35/19
245/40/19
Camber: -2.5(fr) -2(r)
Fender Work: Pulled

dz n.u.t.z
Wheels Spec:
TE Rep
19x9.5 + 7
19x10.5 +22
Tires:
235/35/19
265/30/19

LM reps
19x10.5 +12
19x10.5 +22
Tires
235/35
255/35
Camber -3.4 all around.

Wheel Spec:
Challenges
19x9.5 + 16
19x10.5 +23
Tires:
Nexens 245/35/19
Dunlop 275/30/19
Camber: -3.3
Fender work: Pulled

4DGS
Wheel Specs: WEDS
19x9 +10
19x10 +17
Tires:
Falken Fk452 215/35/19
Falken FK452 225/35/19
Camber: 2.3 all around
Fender Work: Mild roll

Wheel specs: CCWs
18x10 +12
18x11 +20
Tires:
225/40
255/35
Camber: Rear -4.7 Front -3.7
Fenders:
rear pulled to fit
Fronts untouched.

sag35777
Wheel Specs
19 x 9 +15
19 x 10 +15
Tires:
nexen 3000 235/35
nexen 3000 245/35
Camber: ???
Fender work:???

Johnnyone
Wheel Specs:
19x9 +9
19x10 +20
Tires:
Toyo Proxes T1R 225/35/19
Toyo Proxes T1R 245/35/19
Camber: -3.5 all around
Fender Work: Pulled

FlyingLumpia
Wheel Specs:
19x9 +32 with a 15mm spacer
19x10 +32 with a 10mm spacer
Tires:
225/40
255/35
Camber:???

CandlestickPark
Wheel Specs:
19 x 8.5 +0 (25mm spacer)
19 x 9.5 +10 (20mm spacer)
Tires:
Yokohama S-drive 225/35/19
Yokohama S-drive 235/35/19
Camber: -3 F, -4R
Fender Work: Rears pulled 5mm, fronts pinched flat and flared

NAT&FFec
Wheel Specs
19x8.5+22
19x9.5+22
Tires:
255/35/19
255/35/19
Camber:-2F/-3R
Fender work: Rears rolled flat fronts pulled

TycoRC
Wheel Spec:
19x8.5 +20 JLBMotorsport Apollo's
19x9.5 +20
Tires:
Nexen N3000235/35/19
Nexen N3000245/35/19
Camber: -3.3 Front -3.75 Rear
Fender Work: Rolled very flat

Fabrikator
Wheel Spec:
20x9.5 +14 (R-disk) Work Gnosis GS-3
20x10.5 +20 (O-disk)
Tires:
Falken FK452 - 235/30/20
Falken FK452 - 255/30/20
Camber -3.3 Front, -6.0 Rear
Fender Work: Front - Rolled very flat and slight pull, Rear - Pulled

Speeddream
Front: 18X9+2 with a 20mm spacer
Rear: 18x10+9 with a 15mm spacer
Tires:
215-40-18
245-40-18
Camber: N/A yet
Fender: front rolled flat and pulled about 3mm, rear rolled real flat pulled about 3mm

JDM_Cain
Front: 19x9.5+2 with 20mm spacers
Rear: 19x11+24 with 5mm spacers
Tires:
Falken fk452
235/35f
255/35r
Camber: aprox -2.5
Fender: Front rolled flat (side marker bracket modified), rear rolled flat and pulled 5mm

CORNELL
19x10 +10(20mm spacer) VOLK RE30
19X11 +25
235/35 Achilles atr
245/35 Achilles atr
camber: -3 front, -4 rear
fenders rolled flat slight pull




Updated

Chris, is that 19x11 +24 + 5mm spacer or effective +24 WITH 5mm spacer?

19x9 +5
19x10 +10
Tires: 225/35 235/35
Camber: -3.5/-4.0
Fenders: rolled and pulled 5mm F&R

Dammit Grant lol

The Stimulation/Donpisto
Wheel spec
20x9.5 -12
20.10.5 +0
Tires225/35
Camber: Front camber is -4.7 and rear camber is -7.5
Fender Work:rear were rolled flat, pulled and flared upward (upward flare not needed/not beneficial).

The Stimulation/Donpisto
20x10.5 +0
20x11 -12
Tires235/30 (front) and 235/35 rear
Camber: Front camber is -5.5 and rear camber is -8
Fender Work:rear were rolled flat, pulled, hammered and flared upward. front was pinched with fender finisher.
Other: This setup requires modified front upper A arms, and modified rear camber and toe arms.


Gtfever:
Wheel Specs:
19x9+4
19x10-1
Tires:
215/35
225/35
Camber: -3 camber upfront and -4 out back
Fender work: Pulled

4drmadness
Wheel Specs:
Volk Winnings
19x9.5 +17
19x10.5 +19
Tires:
225/35/19
235/35/19
Camber: -3.8 back and -2.4 front
Fender work rolled flat

STCLAIRWEST
Wheel Spec:
19x9.5 +17
19x10.5 +9
Tires:
225/35/19
245/40/19
Camber: -2.5(fr) -2(r)
Fender Work: Pulled

dz n.u.t.z
Wheels Spec:
TE Rep
19x9.5 + 7
19x10.5 +22
Tires:
235/35/19
265/30/19

LM reps
19x10.5 +12
19x10.5 +22
Tires
235/35
255/35
Camber -3.4 all around.

Wheel Spec:
Challenges
19x9.5 + 16
19x10.5 +23
Tires:
Nexens 245/35/19
Dunlop 275/30/19
Camber: -3.3
Fender work: Pulled

4DGS
Wheel Specs: WEDS
19x9 +10
19x10 +17
Tires:
Falken Fk452 215/35/19
Falken FK452 225/35/19
Camber: 2.3 all around
Fender Work: Mild roll

Wheel specs: CCWs
18x10 +12
18x11 +20
Tires:
225/40
255/35
Camber: Rear -4.7 Front -3.7
Fenders:
rear pulled to fit
Fronts untouched.

sag35777
Wheel Specs
19 x 9 +15
19 x 10 +15
Tires:
nexen 3000 235/35
nexen 3000 245/35
Camber: ???
Fender work:???

Johnnyone
Wheel Specs:
19x9 +9
19x10 +20
Tires:
Toyo Proxes T1R 225/35/19
Toyo Proxes T1R 245/35/19
Camber: -3.5 all around
Fender Work: Pulled

FlyingLumpia
Wheel Specs:
19x9 +32 with a 15mm spacer
19x10 +32 with a 10mm spacer
Tires:
225/40
255/35
Camber:???

CandlestickPark
Wheel Specs:
19 x 8.5 +0 (25mm spacer)
19 x 9.5 +10 (20mm spacer)
Tires:
Yokohama S-drive 225/35/19
Yokohama S-drive 235/35/19
Camber: -3 F, -4R
Fender Work: Rears pulled 5mm, fronts pinched flat and flared

NAT&FFec
Wheel Specs
19x8.5+22
19x9.5+22
Tires:
255/35/19
255/35/19
Camber:-2F/-3R
Fender work: Rears rolled flat fronts pulled

TycoRC
Wheel Spec:
19x8.5 +20 JLBMotorsport Apollo's
19x9.5 +20
Tires:
Nexen N3000235/35/19
Nexen N3000245/35/19
Camber: -3.3 Front -3.75 Rear
Fender Work: Rolled very flat

Fabrikator
Wheel Spec:
20x9.5 +14 (R-disk) Work Gnosis GS-3
20x10.5 +20 (O-disk)
Tires:
Falken FK452 - 235/30/20
Falken FK452 - 255/30/20
Camber -3.3 Front, -6.0 Rear
Fender Work: Front - Rolled very flat and slight pull, Rear - Pulled

Speeddream
Front: 18X9+2 with a 20mm spacer
Rear: 18x10+9 with a 15mm spacer
Tires:
215-40-18
245-40-18
Camber: N/A yet
Fender: front rolled flat and pulled about 3mm, rear rolled real flat pulled about 3mm

JDM_Cain
Front: 19x9.5+2 with 20mm spacers
Rear: 19x11+24 with 5mm spacers
Tires:
Falken fk452
235/35f
255/35r
Camber: aprox -2.5
Fender: Front rolled flat (side marker bracket modified), rear rolled flat and pulled 5mm

CORNELL
19x10 +10(20mm spacer) VOLK RE30
19X11 +25
235/35 Achilles atr
245/35 Achilles atr
camber: -3 front, -4 rear
fenders rolled flat slight pull

Gdup35sedan
PIAA Supper rozzas
19x9 +5
19x10 +10
Tires: 225/35 235/35
Camber: -3.5/-4.0
Fenders: rolled and pulled 5mm F&R

XXR 521
18x10 +15 front and back
225/40
225/45
-3 degrees of camber.
rolled and pulled 5mm



Correct me if I'm wrong on you XXRs, that's what I remember off the top of my head!

Hey guys im looking for some insight my 05 Sedan it is lowered on Tein S techs
and the wheels im looking at are 20x8.5/10 +20/+43

I have all stock control arms i have approx 2-3* of camber upfront and 4* in the rear

the tires i want to run will be 225/30 255/30

I just want to be KindaFlush, this is my DD and dont want anything too crazy, just a clean look

someone side swiped me on the fwy so shes in the body shop and im getting a new set of wheels while shes in. im pretty sure ill have to roll the rear fender, but i dont think i will have to do anything up front.

Thanks for the help, i love this thread your guys cars are sick!