OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
Alright, Stance virgin here and I'm wheel shopping for my 04 Sedan. Found some ZR+520 in 19x8 +37mm front and 19x9 +20 in the rear. My thought is that it's not enough in the front to be flush, so just some spacers (+10-15) in the front would make it perfect. Thoughts?
forget these wheels and go for something in the range of 9.5 +6 - +18 and 10.5 +6- +18 and then SLAM IT! that should be good
So curious what you are getting next. The Gnosis are my faves of all your wheels so far.
Offsets are perfect, just run a 10mm spacer up front and you are set. Would be within 2mm of my current setup up front and 1mm out back for comparison purposes.
Offsets are perfect, just run a 10mm spacer up front and you are set. Would be within 2mm of my current setup up front and 1mm out back for comparison purposes.







