OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
After test fitting the fronts and rears I think I'm gonna go with 235/245. The more tire I can fit the better.
They're Maya STM.
Has anyone installed an SPC toe bolt? I need to fix my toe but I'm not sure if that bolt will bring it back to the center with -5/-6 ish camber.
They're Maya STM.
Has anyone installed an SPC toe bolt? I need to fix my toe but I'm not sure if that bolt will bring it back to the center with -5/-6 ish camber.
Got a question... I'm thinking about getting some 19" xxr 522's 9.0F and 10.5R +25 all the way around. Will I have to stretch the rear tires? I already have my fenders rolled, and 9.5's barely tuck in the rear.

EDIT: I lied, the xxr's are 8.5F +15 offset and 10.0R with +20 offset.

EDIT: I lied, the xxr's are 8.5F +15 offset and 10.0R with +20 offset.
Last edited by Dr3w5ki; Sep 16, 2012 at 11:46 PM. Reason: Wrong wheel specs.
Will that bolt bring my toe back to spec, or close to it? I just don't want my wheels to look sideways
^ you know the wheels will be "sideways" either way right? you need camber for this set up....
As for toe, I'm running -6-7 and my toe is zero'd with OEM toe bolts. Some people can't do this, but you should be fine with the SPC bolt kit.
As for toe, I'm running -6-7 and my toe is zero'd with OEM toe bolts. Some people can't do this, but you should be fine with the SPC bolt kit.
ENVautoDetailing.com
iTrader: (47)
Joined: Sep 2005
Posts: 9,257
Likes: 136
From: San Diego/Redondo Beach

Blain, your car is a freak of nature... Lol




