OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
#1396
ill Sedan
iTrader: (87)
^ i'm aware. I meant before he put the spacer, wondering if he rubbed before the spacer and if he didn't rub if his fenders were rolled at all. because i have the same tire size and putting 10mm spacers on my 19"s would put me at only 2mm more lower offset than his LMGT4s without spacers
#1397
ill Sedan
iTrader: (87)
#1399
^ i'm aware. I meant before he put the spacer, wondering if he rubbed before the spacer and if he didn't rub if his fenders were rolled at all. because i have the same tire size and putting 10mm spacers on my 19"s would put me at only 2mm more lower offset than his LMGT4s without spacers
Thank is not "poke," that is "sticking the **** out"
/thread!!!
#1400
ill Sedan
iTrader: (87)
#1401
#1402
ill Sedan
iTrader: (87)
#1403
#1404
ill Sedan
iTrader: (87)
#1405
#1407
As Marcus said, even with a 15mm you'll have to camber. Get the SPL v3's or Cusco and modify them like I did, unless you can find 350 Evo arms.
Where you're at now you would need to dial in another 5-7 degrees of camber to make it clear.
Where you're at now you would need to dial in another 5-7 degrees of camber to make it clear.
Last edited by The Stimulation; 08-01-2010 at 03:54 AM.
#1410
I will get some. Odd thing is, my car now sits LOWER in the rear since the spacer and camber arm install. When from 1 finger gap to almost .5 -.25 finger gap Looks odd. More I think about it, I think the caster may be way off since the wheel is not quite centered in the well. Higher degree of caster would probably result in less verticle ride height.
Last edited by Matzo Ball; 08-01-2010 at 04:28 PM.