New to this forum thought I would share a couple pics of the car. Looking for some advice on Front Spacers for Oem 19's on a Sedan for a nice flush look!! any input is very helpful!

When I first had Sevas on it


Before Paint

After Paint



Mods:
Apex WS Muffler
Z tube with Stillen Airbox
Lip Spoiler
SPL Lower Control Arm Bushings
Tein S Techs
Nismo Black Aluminum ShiftKnob
Clear Corners
8000K Hids
Amber Fogs

Soon to have a Matte Black Roof Overlay..

Opinions Please!

 

Lookin' good so far man. Welcome to driver.

What tire sizes are you running on the OEM 19s? Need to know this to recommend a spacer size.

Any pics of your Apex WS Muffler?

 

Right now im running 225/40/19 Fronts and 245/45/19 In the rears. Im due for tires soon, these are just the tires I got the wheels with..The rears look good, the fronts definately need a spacer.

 

This is the only pic I have right now of the WS

 

Welcome from another FL sedan!

I hope you know you're required to attend the next big G meet

Also... (since you asked)
Don't go with a matte black overlay, it will look weird, especially against the sunroof.

 

Nice debut! Welcome.

 

Nice, welcome.

 

Nice man looks good Welcome !

 

Looking good man...why'd you switch from Sevas to OEM? I recommend an OEM front lip ASAP...

 

Looks good. I got the same tire sizes in the front as you. I put 10mm spacer but is still not where I want it to be. I got no spacer in the back with 255/35/19. I'm gonna move the 10mm from the front to the back and put a 15mm on the front and it should sit nicely. Rear fenders might need to be rolled though. I reccomend 255/35's for your next set of rear tires. If you're dead set on matte black roof you can always wrap it with matte black vinyl and cover the sunroof as well. Is not like you need to see thru that glass

 

That's a wonderful color you got there :-D

 

Oh and go gloss black on the roof. Matte will look off.