Finally fitment perfect! =]
#31
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
I actually might be rubbing when I go over a bumper, because the gap and where the fender liner bolt is, the space is really really tight. So when it tucks underneath, it most likely is rubbing....What should I do? Pull the hardware out? I read about this, when you say pull the hardware out do you mean take that bolt off? Or remove the whole fender liner?
#34
I actually might be rubbing when I go over a bumper, because the gap and where the fender liner bolt is, the space is really really tight. So when it tucks underneath, it most likely is rubbing....What should I do? Pull the hardware out? I read about this, when you say pull the hardware out do you mean take that bolt off? Or remove the whole fender liner?
#35
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
And this wouldnt mess with holding the fender liner in place? Thanks for advice. I'm loving my G more and more everyday, and also because of how people get together to share the same passion. So SICK!
Now to get my front bumper repaired and fitted better. Then OFF TO SOME PSI action...or maybe a headlight retrofit first =P
Now to get my front bumper repaired and fitted better. Then OFF TO SOME PSI action...or maybe a headlight retrofit first =P
#38
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
http://youtu.be/P47wNxPIFP8
Rolling clip while on the way to drop the car off at a bodyshop for bumper.
Rolling clip while on the way to drop the car off at a bodyshop for bumper.
The following users liked this post:
JaE35 (04-09-2012)
#39
The following users liked this post:
jimmyboi860 (04-09-2012)
#44
The following users liked this post:
jimmyboi860 (07-19-2012)