[QUOTE=AlterZgo]Marcel - Why are you so up on Automotive Mods? It looks like they sold you a set of rims that don't fit properly. Also, what's up w/ this shaving the hub of the rim to get it to fit properly? They should be ordering you a set of new rear rims that have the proper offset and width so that there is no need for modifications to the rim itself.

^^^^Tru that

 

terry not to sound like an shmuck but im not exactly sure lol. I was a noob to wheels when i purchased these. I believe the guy said something about a +45 or +42 but dont quote me on that.

 

Logik, what type of wheels are those?

 

they are fusion flex.

 

can you take a side pic? that thing looks slammed in the rear and even lowered in the front from that angle even though you say no drop

 

The picture is deceiving. I actually had 2 set of wheels in my trunk and two in the rear seats

-replaced the old pic-

 

my g35s with stillen exhaust and intake

 

[IMG][/IMG]





pretty ballsy to go with the red lip i know but with a drop itll look so mean. stock tires. 18 by 8.5. eibachs on the way and blacking out the trim possible debadging.

 

g35_6gear,

What is the offset for your rear wheels?

 

How far do your rear wheels stick out? 0.5" or 1"? If it's only 1" or less, the tires will tuck in when you lower your car. My rear wheels stick out 2" before lowering. After lowering, they stick out about 0.6". The rub when I drive over major bumps so I took them off. Need to buy new wheels.

 

Finally got the wheels and Eibach ProKit installed. Axis Penta, 20X9 Front, 20X10 Rear, 25mm offset all wheels
<img src="http://www.geocities.com/dazzevolution/G35S/LCG35S_6.jpg"><br>
<img src="http://www.geocities.com/dazzevolution/G35S/LCG35S_5.jpg"><br>
<img src="http://www.geocities.com/dazzevolution/G35S/LCG35S_3.jpg"><br>
<img src="http://www.geocities.com/dazzevolution/G35S/LCG35S_2.jpg"><br>
<img src="http://www.geocities.com/dazzevolution/G35S/LCG35S_1.jpg"><br>
I got these wheels from my 04 G35 Coupe which I traded in for the 07 Sedan. I was just wondering how's the fitment on the rear with 20X10 with 25mm offset. The rear wheels sticked out about 2" before lowering. After lowering, they sticked out about 0.5" with 255/35 tires. No rubs were detected without a full load on the back. With the rear fully loaded, ouch!!! you don't want to hear it, the rear tires rubbed every time I drove over a bump. I'm putting these wheels for sale now. I'm gonna go with MRR GT1 once I get these wheels sold.

 

What size tires are you using? Are you sure about those sizes and offsets? Is this the setup you mentioned in your previous post in this thread that was rubbing?

 

Terry,

I'm really sure about the sizes and offsets. The rear tires were 255/35. By they way, do you now have rims on your car? If so, what kind, size, and offset? Can you post some pics?

 

hm... 25mm offset looks to be too much for 07.

 

Ah ... 255 might be possible ... I guess the wheels stick out of the fender a little, but the 255's might clear with enough camber. Any rubbing? Be sure to put up those daytime pics!

Link to pictures of my set up are here:

https://g35driver.com/forums/media-share-v36-sedan/175452-dpe-s10-wheels-2007-sedan.html

The final configuration is on page 3.